698705
5
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
Subwoofer
Low Level connection
Surround-amplifier
Left
right
8
EN
9
During Bi-wiring / Bi-amping operation of the AURUM loudspeaker, both screw terminals for the woofer (LO)
are below and for the midrange speakers and tweeters (Hl) are above on the connection plate.
Only the largest models of the AURUM 9 series are fitted with an extended connector panel by means of
which these connections are arranged horizontally and the various operating modes apply analogously with
the assignment of (Hl) and (LO).
Make sure you use the correct polarities in these modes and that you remove the jumpers on the speaker
terminal to avoid damaging your amplifier.
OPERATION WITH A SURROUND AMPLIFIER
Once you have positioned and connected your speakers as shown in the illustration, you should perform the
necessary settings in the bass management system of your surround amplifier.
Make sure you read the user manual supplied by your amplifier’s manufacturer before doing this.
Since bass management primarily depends on the loudspeaker configuration, we give only typical settings
below.
a) Small and very small satellite speakers must be operated in “small” mode.
Perform the setting on your amplifier as follows:
Front: small Centre: small
Rear: small Subwoofer: yes
b) There is no definitive formula for the settings for compact speakers. In this case, the suitable mode may be
“large” or “small”. This depends on the volume level you prefer or the sound effect you wish to obtain (refer
to the section “Caution, clipping!”). The settings on your amplifier can optionally be configured as follows:
Front: large/small Centre: large/small
Rear: large/small Subwoofer: yes
c) Floorstanding speakers or large bookshelf speakers that are suitable for powerful bass reproduction
should be operated in “large” mode.
Perform the setting on the amplifier as follows:
Front: large Centre: large
Rear: large Subwoofer: yes/no
Subwoofer
If your surround amplifier has a “line subwoofer” output, you can make use of this by using the Y cable supplied
with the subwoofer (see illustration page 8). In this case, you connect the front speakers directly to the front
speaker terminals of your amplifier. Refer to the connection diagram for wiring your surround system.
Refer to the user manual of the active subwoofer for the necessary settings on your subwoofer!
TIPS FOR BETTER ACOUSTICS
1. The AURUM stand-mounted loudspeakers are fitted with a holder for spikes in order to achieve better
acoustic decoupling of loudspeaker from the floor. Use of spikes can be advantageous dependent on the
nature of the living room and the floor.
AURUM spikes can be obtained separately as an accessory from your dealer.
2. In order to achieve better acoustic decoupling from the mounting surface for shelf or centre speakers, lay
each of these loudspeakers on 4 self-adhesive felt washers.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Quadral AURUM 9 PASSIV bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Quadral AURUM 9 PASSIV in de taal/talen: Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 1,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info