12
Audio
Set the Treble and Bass levels.
Manual tune
Shows DAB signal level, which can help you find the best position for your radio.
1. Use the +/- buttons to scroll through different channels and push Select to choose one
(UK stations are in the range 11B to 12D). You see a signal level display. The empty
block indicates the minimum required level for reception and the filled blocks indicate
the current level.
2. Move your aerial/unit and to try to raise the current level to the empty block or beyond.
Once you have a good signal the display will show the Multiplex name and add the
stations to the station list.
3. Push the Menu button to exit or +/- and Select buttons to change channel.
FM only options
FM stereo mode
Choose from Stereo or Mono − mono may improve audio clarity where stereo signals are weak.
Help and specifications
Secondary and inactive stations
(<</>>) Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. If a station has secondary services available, the
station shows ‘>>’ next to its name in the station list and the secondary service appears next to
the station in the list. A secondary service has a ‘<<’ before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations appear on the station list preceded by ‘?’ and cannot be tuned
to. A station may be inactive or unavailable because the station is not broadcasting at the current
time (check with the station) or has stopped broadcasting altogether. Also, you may not have a
strong enough signal to receive the Multiplex on which the station is broadcast.
Hints and tips
The message on screen says ‘ No stations available’
DAB reception is not strong enough to receive any stations. Check that your aerial is fully uncoiled
and use Autotune (page 10) to search for stations. Try adjusting your aerial and radio position.
The screen is very dark
Check the Display settings. Check that the light sensor is not obstructed if Auto dimming is
selected.
The on-screen clock does not appear
If you disconnect the unit from the mains whilst listening to your iPod and then plug it in again,
you may need to change the audio source to DAB so that the time can be acquired from the DAB
signal.
