572610
7
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
10 11
џ Hold down the “MODE” (3) button to activate colour inversion mode
(functions “White hot” and “Black hot”). When function “White hot” is used,
warm objects are represented in shades of bright colour; “Black hot” renders
objects in shades of dark colour.
ZEROING
The sight features two zeroing methods - “one shot” zeroing and using
FREEZE function.
Zeroing should be done at operating temperatures, by following the order of
these steps:
One shot zeroing
џ Mount the rifle with the sight installed on a bench rest.
џ Set a target at a distance of about 100m.
џ Adjust the sight according to the instructions of Section 9 “OPERATION”.
џ Aim the firearm at the target using the mechanical sight.
џ Take a shot. If the point of impact does not match the aiming point, press the
controller (9) to enter menu M2 and rotate the controller to select option
“Zeroing” marked with icon.
џ Red auxiliary cross (C) appears in the centre of display. On the right of the
icon appear horizontal arrows and coordinated of the auxiliary cross .
џ Holding the reticle in the aiming point, by rotating
the controller (9) move the auxiliary cross (С)
horizontally or vertically relative to the reticle until
the auxiliary cross matches the point of impact (P)
(see pic.).
џ To switch between movement direction push the
controller (9) to hear a click. Vertical lines appear
next to the icon .
Note: the auxiliary cross moves only within the limiting frame (see pic.) that
defines its travel range: 200 clicks horizontally (+100/-100) and 200 clicks
vertically (+100/-100).
џ Exit submenu “Zeroing” with a long press of the controller button. Message
OK confirms successful operation. The reticle will now move to the point of
impact.
Attention! Do not turn off the sight before zeroing settings are saved,
otherwise your settings will be lost.
џ Take another shot - the point of impact should now match the aiming point.
џ The sight should now be zeroed-in for the specified distance.
Zeroing with “Freeze” function
џ Before using this function, please take a shot.
џ Select “Freeze” function in submenu M2.
џ Sight will prompt you to press any button on the sight or wireless control
within 30 seconds to freeze (memorize) the image. The status bar shows
corresponding icon.
џ Before pressing a button match the reticle of the sight with the aiming point
(as a rule - target centre). After button is pressed, the image “freezes” and a
limiting frame with an auxiliary cross appear. Rotating the controller, move
the auxiliary cross within the limiting frame until the cross matches the
point of impact.
Note. After the image freezes, you do not need to keep your weapon pointed
at the target.
џ Pressing the controller button allows you to switch direction of auxiliary
cross (horizontal or vertical). Long press of the controller button saves
zeroing settings and exits the menu.
џ Saving the settings is confirmed with “Ok” message displayed instead of
the coordinates.
џ After exiting the menu, the image returns to normal.
Note: zeroing parameters (coordinates X; Y) are saved in the sight's
memory as number 1 in the menu option “Weapon choice”. If you want to
zero in the sight using another weapon or another distance, select option 2 or
3 (details in the menu option “Weapon choice” section 12) and do the
zeroing.
MENU
OPERATING THE MENU
Long press of the controller entering the menu.
Rotating the controller menu navigation.
Short press of controller entering menu option; selecting value in menu
option, exiting menu option or moving to the next parameter (clock mode).
Long press of controller exiting menu option and menu (depending on
the cursor actual position). Automatic exit the menu takes place after more
than 10 seconds of inactivity (no navigation).
THE SIGHT HAS TWO MENUS
M1 menu 1 (main menu);
М2 menu 2 (additional menu);
Active submenu is highlighted with a frame . To switch to the other menu,
rotate the controller and move the cursor (the frame will be flashing), press
briefly the controller.
STATUS BAR
Status bar in the bottom part of the display shows information as follows:
1. Number of weapon choice (1,2,3):
2. Operation mode (“Rocks”,”Forest”,”Identification”):
3. Calibration modes - manual, semiautomatic and automatic:
4. 2x smooth digital zoom is on:
5. Image inversion is on:
6. Running time:
7. Battery charge level or connected external battery:
H
,
C
P
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pulsar Apex LD38 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pulsar Apex LD38 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 4,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info