782204
6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
- 7 -
Description of the machine
Note:
The set 38515 icludes additionally:
1 Power unit
1 set of tools, see page 8
1 flexible shaft, see also page 8
Legend
1. ON - OFF switch with speed control (MM 50/E only)
2. Retainer
3. Connecting cable
4. ON - OFF switch (MM 50 only)
5. Lock button
6. Clamping nut with collet
7. Housing cap
Functional Description
The PROXXON Rotary Tool Micromot 50 / Micromot 50/E
is the ideal tool for precise drilling, milling, grinding,
polishing, brushing. It can be used for cutting, for engraving
and to remove rust. For hobby electronics, model making,
precision mechanics, jewellery shops, opticians, arts, tool
and mould making. For marking tools and cameras. It can
be used on steel, non-ferrous metals, glass, plastic
materials, wood, minerals and ceramics. The drill spindle is
supported in a precision ball bearing which eliminates any
play. Excellent handling because of the pen-type grip. The
machine is reliably driven by a high torque motor. Type
50/E is fitted with an electronic speed regulator.
Technical data
Length: approx. 9" (220 mm)
Weight: approx. 1/2 lb (230 g)
Spindle collar: Ø 3/4" (20 mm)
Motor:
Speed (50): 20 000 rpm
Speed (50/E): 5000 to 20 000 rpm
Voltage: 12 to 18 V
Power draw: approx. 40 W
Noise level: 70 dB (A)
Operation
Clamping, changing tools
Warning:
Never press the locking pin (arrow Fig. 2) while the
machine is running.
– Turn the clamping nut 1 (Fig. 2) lightly while pressing the
lock button until the pin engages.
– Open the collet and change the bit.
Clamp all tools as short as possible. Shafts, which stick out
too far will easily bend causing the machine to vibrate.
Power supply:
Use only power units with a minimum power of 1 A. We
strongly recommend to use the PROXXON adaptors type
NG 2 (S/E) or the NG 5/E or the included power suppy
(only 38515).
Warning:
Do not use a power unit with external speed control in
combination with the Micromot 50/E !
1. Push the non-reversible plug into the power unit.
In case of overloading the PROXXON-power unit will
switch off automatically. Pull the mains plug out and let the
power unit cool down for some minutes.
Working with the machine
Warning:
Always wear goggles!
Do not use any broken grinding discs or bent shafts!
Wear a breathing mask when working under dusty
conditions!
2. Start the machine on switch 4 (Fig. 1) or set the correct
speed (50/E only) with the button 1
Note:
High performance is not achieved by high pressure but by
even speed!
Small tools = high speed
Big tools = low speed
3. For delicate work hold the tool like a pen (Fig. 3). Keep
the ventilation slots open.
4. For rough work hold the machine like a hammer
The electronic speed regulation works only with non-
stabilized power units (like for example all PROXXON-
power units). In connection with a battery the machine will
only run at high speed.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proxxon MICROMOT 50-E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proxxon MICROMOT 50-E in de taal/talen: Engels als bijlage per email.

De handleiding is 0.7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info