490618
17
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
17
8 Accessories
WARNING
Before carrying out any work on the
machine, pull the mains plug.
All common drill chucks with 1/2 × 20 UNF
internal threads (13 mm max. chuck open-
ing) can be used. The drill chuck is mounted
on the screw adapter [2-2] (accessories)
for screw-bits.
8.1 Screw adapter assembly
Retract the unlocking sleeve [2-1].
Insert the screw adapter [2-2] into the tool
holder [2-3] while rotating.
Release the unlocking sleeve.
Check the interlock by pulling the screw
adapter.
8.2 Thread chuck
Inserting
Clean the thread on the drill chuck (ac-
cessory) and on the screw adapter [2-2]
(accessory).
Screw the drill chuck [2-4] onto the adapter
[2-2].
Removing
Pull the unlocking sleeve [2-1] backwards
and remove the drill chuck [2-4] with the
screw adapter [2-2].
If required, rst screw the drill chuck [2-4]
from the screw adapter [2-2].
8.3 Tool chuck CENTROTEC
The tool chuck CENTROTEC allows you to
change tools with a CENTROTEC shank in
a matter of seconds.
Always use a CENTROTEC tool chuck to
clamp CENTROTEC tools.
CAUTION
Risk of cutting injuries when chang-
ing the tool!
Wear protective gloves!
Attaching the CENTROTEC
Pull the release ring [3-5] forwards.
Attach the tool chuck to the adapter [3-2].
Release the ring [3-5].
Detaching the CENTROTEC
Pull the release ring [3-5] forwards.
Remove the tool chuck.
Changing tools
To t or remove a tool with a CENTROTEC
shank, pull back the orange ring [3-6].
While proceeding so, keep turning the tool
until its shank engages in the adapter.
Release the ring [3-5].
9 Practical tips
Do not drill into hidden electri-
cal lines or gas and water pipes.
Check the area to be worked
with a metal detector, for example, before
starting.
For metal, use only awless, sharpened
drills; for stone and concrete, only masonry
drills with hard metal inserts.
Always adapt the speed to the material to be
worked and the diameter of the drill. For pre-
cision working with metal and wood, place
the machine in a drill stand (accessory).
10 Maintenance
- The unit should be stored in a dry place
where it is protected against freezing.
- Before any work on the machine itself,
pull the mains plug!
- Always keep the ventilation slots clean.
- The cable may only be replaced in a spe-
cialised electrical workshop quali ed to
perform such work.
- Wipe off the accessible plastic parts regu-
larly with a cloth without cleaning agent.
- After heavy use over a long period, the
machine should be taken to a service
location for an inspection and thorough
cleaning.
- Replacing brushes: Worn carbon brush-
es should be replaced by an authorised
customer service organisation.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool RHP 18 PLUS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool RHP 18 PLUS in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 9,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info