490712
8
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
Intended use
Safety instructions
8
Technical data
Operating controls & Description
Type reference PLP 300
Voltage
Frequency
Rated input
Power output
Speed: no-load
rated load
Planing depth
Planing width
Weight of the electric tool
Safety Class
230V~
1 470 W
7
50-60Hz
2 100 W
10 300 min
220 min
0-3mm
300 mm
16 kg
II /
-1
-1
GB
1. Main handle of the planer
2. Mains switch
3. Lock-off button
4. Overload protection button
5. Front handle, swiveling (for planing depth
adjustment)
6. Planing depth scale
7. Front shoe, adjustable
8. Fixed shoe
9. Guide roller
10. Air inlet openings
11. Chip discharge openings
12. Chip deflector
13. Chip deflector fixing knob
14. Machine housing cover
15. Cutting head with blades
16. Reversible blade
17. Blade backing plate
18. Blade clamping rail
19. Hole for insertion of the locking pin for blade
replacement, preventing rotation of the cutting
head
20. Blade fixing screws
22. Driving belt guard
23. Brush cap with carbon brush
The accessories shown or described in this Operating
Manual may not be included as a part of delivery.
The carpentry planer is universally applicable for
planing and smoothing of visible surfaces on rafters,
e.g. projecting rafters, rafter ends and purlins; it may be
also utilized for planing structural timber and lattice
work, as well as for other carpentry works or
woodworking in general.
The user is solely liable for damage and accidents
caused by improper use of the product.
This electric tool may only be used, maintained and
repaired by the people who have received the
relevant instructions. These people must have
reached the minimum age legally required. For safe
work and familiarizing with all the remaining risks,
they must have read and understood this Operating
Manual.
1. For maximum safety of work with this electric tool,
read this Operating Manual carefully and observe
all the instructions given herein.
2. Follow the safety instructions supplied separately
as a part of delivery with each electric tool.
3. The electric tools shall not be used in damp or wet
locations, outdoors in the presence of rain, fog,
snow, or if there is a risk of fire or explosion.
4. Check the power supply cord and plug before each
use of the electric tool. Have any defect repaired
by a professional service workshop.
5. Remove plug from the mains before performing
any work on the electric tool.
6. Only insert plug in the mains socket when the
electric tool is switched off by the mains switch.
Always keep the power supply cord back away
from the electric tool while working and allow the
cord to move freely in the whole working area to
make trouble-free work possible.
7. When working outdoors, use exclusively the
extension cords and cable connectors attested for
outdoor use.
8. The electric tool may only be started after placing it
on the workpiece in initial position.
For safe work with this electric tool and prevention of
injury, it is imperative to follow all generally accepted
safety principles and regulations for prevention of
accidents, and read the enclosed "Safety instructions”
thoroughly.
The manufacturer disclaims liability for damages
caused by unauthorized modifications or using other
than the supplied or specified accessories with the
electric tool.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool PLP 300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool PLP 300 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info