KPH:The unit for the Speed and Distance is Km
MPH:The unit for the Speed and Distance is Mile
SCAN
Press the button until the SCAN display on the screen. Monitor will display the following
function and each function will keep 6 seconds on the screen.
Scan-Time-Speed-Calorie-Pulse-Distance
TIME
Press the button until the TIME display on the screen. Monitor will display the Time
function on the screen.
Count up:
Without setting the time value, the monitor will count up the time from 00:00~99:59
Count down:
Setting the exercise time from 1:00~99:00 minutes, the monitor will count down from your
setting values. Once reach setting value, monitor will alarm
SPEED
Press the button until the SPEED display on the screen. Monitor will display the speed
function on the screen.
CALORIE
Press the button until the CAL display on the screen. Monitor will accumulate the calorie
consumption.
DISTANCE
Press the button until the DIST display on the screen. Monitor will display the distance
function on the screen
Count up:
Without setting the distance value, the monitor will count up the time from 0.1~999.9Km or
Mile
Count down:
Setting the exercise time from 1.0~999.0Km or Mile, the monitor will count down from your
setting values. Once reach setting value, monitor will alarm
PULSE
Press the button until the ♥display on the screen. The monitor will display your current
heart beat rate in beats per minute
Pulse Limit :
Setting the value of pulse limit between 90 to 220, the monitor will measure your heartbeats.
Once reach setting value, monitor will alarm twice every 6 seconds every 6 seconds until your
heartbeats under your setting value
Place the palms of your hands on the both of the contact pads and the monitor will show up
your current heart beat rate in beat per minute (BPM) on the LCD display
The batteries must be removed from the appliance before it is scrapped and that they
are disposed of safely.
