567093
7
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
LAMP WITH ENERGY-SAVING LIGHT EN - 1
PLI-134 / PLI-137 / PLI-139
Le agradecemos la compra de este producto Profile.
Atención: Es importante que lea atentamente este
manual antes de utilizar el producto. Conserve bien
este manual.
Note
Check if building regulations apply to your area
whereby you must have the lamp installed by an
accredited electrician. An electrician can give you
information about correct wiring. Never install the fitting
outside in rainy weather.
SWITCH OFF THE POWER BEFORE YOU INSTALL
THE LAMP.
Correct installation
With installation outside preferably choose a place
under a roof.
Connect the lamp to a circuit with wall switch.
Unscrew the stainless steel bolts on the side to take
the holder from the fitting.
Fix the holder to the wall with 2 screws.
Fix the lamp back on the assembled holder.
Remove the cover of the cable connection.
Pull the power supply wires through the opening with
the rubber packing.
The lamp must be connected to mains voltage of
230V, max. fusing 16A.
Connect the wires according to figures 1 and 2.
Screw the cable connection cover tight again.
Always respect the instructions on the identification
label of the connected power cables.
Other uses than described above can cause damage
to the product and increase the risk of short-circuit,
fire, electric shocks, etc.
Fig.1
Fig. 2
The product may not be adapted as a whole. The
safety instructions must be strictly observed.
Safety instructions
The importer accepts no responsibility for damage
claims with respect to objects or persons that result
from incorrect use or non-compliance with the safety
instructions. Any damage claims in such cases will
be declared null and void.
When replacing the R7S 24W energy-saving light the
power supply must be switched off. Do not exceed
the maximum wattage of 24W.
Always replace cracked or broken glass by glass
with the same properties as the original glass.
Technical information
Working voltage: 230V AC (50/60 Hz)
Maximum lamp power: 24W
Maximum current strength: 10/16A
Dustproof and splashproof: IP44.
Passive infrared sensor (PIR)
Sensor angle: 120°
Sensor range: 10 metres at with 25°C.
Lighting time: +/- 5 sec. – 10 min.
Setting the functions
1) Setting the light intensity (lux)
With the LUX Switch you adjust the working of the
sensor to match the intensity of the ambient light.
If the arrow is pointing to the sun the sensor responds
in both daylight and at night.
If the arrow is pointing to the moon the sensor will only
respond at night.
In between the sensor responds in half-light.
2) Setting the lighting time (TIME)
With this adjusting knob you can set the period of the
light staying on after switching on. You can set the
time from 5 sec. to 10 min.
Continuous function
With this function you can allow the lamp to stay on
continuously (the sensor then no longer works).
To do this switch the switch the fitting is connected to
on and off for 1 second. The lamp will now stay on
continuously.
To switch off the continuous function switch the switch
the fitting is connected to off for 30 seconds and then
on again.
Maintenance
Only use a dry, soft cloth for cleaning the lamp.
Never immerse the lamp in water.
Maintenance and repairs may only be carried out by
technicians who are familiar with any applicable
regulations.
* L = phase
*
= earthing
* N = neutral wire
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Profile PLI-139 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Profile PLI-139 in de taal/talen: Nederlands als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info