566796
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
PIN-144 MANUAL
1 Overview
This instrument is a compact, battery operated, handheld 3 1/2
digital multimeter designed for use by technicians, servicemen,
students, and hobbyists who requir an instrument that is accurate,
reliable, and always ready for use. The Dual-slope-A/D converter uses
C-MOS technology for auto-zeroing, polarity selection and over-range
indication. Full overload protection is provided. It is powered by a
standard 9V type battery. Please read this manual before using the
multimeter.
2 Panel Layout
1LCD Display
2 POWER Switch Boot Up /
Shutdown
3Data-hold Switch (HOLD)Pressing
this button, the meter enters the auto
data hold mode and HOLD is
displayed on the LCD.
4 Back Light Button Switch:
Pressing the button turns the
backlight onpressing it again turns
it off.
5) Function switch indicator lamp
6) hFE Input Jack
7) Rotary Switch: use this switch to
select functions and ranges
8) mechanical blocking system.
920A Input Jack, mA Input Jack, V
ΩInput Jack, COM Input Jack
3 SPECIFICATION
3.1 GENERAL CHARACTERISTICS
3.1.1 3 1/2 digit big LCD max. indication 1999.
3.1.2 Auto-Zero & Auto-Polarity .
3.1.3 Overrange: indication of 1 or -1.
3.1.4 Low battery indication:
3.1.5 Power supply : 9V Zinc-carbon battery .
3.1.6 Safety standards :The meter is up to the standards of IEC1010
Double Insulation , Pollution Degree 2 ,overvoltage Category III.
Safety symbols:
important safety information, refer to the operating manual.
Dangerous voltage may be present.
Double insulation (protection Class II)
3.1.7 Mechanical blocking system for terminal sockets to prevent
mistake operation
3.1.8 Temperature for guaranteed accuracy: 23℃±5
3.1.9 Temperature range :
Operating :0 to 40 Storage : -20 to 60
3.1.10 Humidity range :
Operating : max 75%RH Storage: max 80%RH
3.1.11 Size: 190mm×88.5mm×27.5mm
3.1.12 Weight: Approx 320g (including battery).
3.1.13 Accessories : operation manual 1 piece
test leads 1 pair
temperature test probe 1 pair
3.2 MEASUREMENT SPECIFICATION
Environment :
Temperature : 23℃±5 relative humidity : max .75%
3.2.1 DC voltage
Range
Accuracy
Resolution
200mV
±(0.5% of rdg + 8digits)
100uV
2V
1mV
20V
10mV
200V
100mV
1000V
±(1.5% of rdg + 8 digits)
1V
Overload Protection : 1000V DC/700Vrms AC on other ranges.
Input impedance : 10MΩ on all ranges
3.2.2 AC voltage (Average sensing. Calibrated to rms
of sine wave)
Range
Accuracy
Resolution
2V
±(1.5% of rdg + 10 digits)
1mV
20V
10mV
200
100mV
700V
±(2.5% of rdg +10 digits)
1V
Frequency:2V~20V at 40Hz~400Hz; 700V at 40Hz~200Hz
Overload Protection : 1000V DC/700Vrms AC on all ranges.
Input impedance : 1MΩ on 2V range; 10 MΩ on other ranges.
3.2.3 DC Current
Range
Accuracy
2mA
±(0.8% of rdg +8 digits)
20mA
200mA
±(1.2% of rdg +8 digits)
20A
±(2.0% of rdg +10 digits)
Overload Protection :0.2A/250V fuse, 20A/250V fuse 20A up to 10
seconds
3.2.4 AC current (Average sensing. Calibrated to rms of sine
wave )
Range
Accuracy
Resolution
2mA
±(1.0% of rdg + 8 digits)
1uA
200mA
±(2.0% of rdg + 8 digits)
100uA
20A
±(3.0% of rdg + 15 digits)
10mA
Frequency : 40~200Hz
Overload protection : 0.2A /250V fuse, 20A/250V fuse 20A up to 10
seconds
3.2.5 Resistance
Range
Accuracy
Resolution
200Ω
±(1.2% of rdg +15 digits)
0.1Ω
2KΩ
±(0.8% of rdg + 8 digits)
1Ω
20KΩ
10Ω
200KΩ
100Ω
20MΩ
±(2.5% of rdg + 15 digits)
10KΩ
Overload protection :250V DC/250Vrms AC for all range.
3.2.6 Capacitance
Range
Accuracy
Resolution
2nF
±(2.5% of rdg + 25 digits)
1pF
20nF
±(2.5% of rdg + 20 digits)
10pF
200nF
100pF
2uF
1nF
200uF
0~100 uF
±(2.5% of rdg + 25 digits)
100nF
100~200
uF
±(6.0% of rdg + 55 digits)
Overload Protection :36V DC/36Vrms AC for all range
3.2.7 Frequency
Range
Accuracy
Resolution
200kHz
±(3.0% of rdg + 15 digits)
100Hz
Calibrated to the signal of square wave
Sensitivity: 1.0V
Overload protection : 250V DC/250Vrms AC (up to 15 seconds )
3.2.8 Temperature
Scale
Accuracy
Resolution
(-201000)
±(0.75%of rdg+3 digits)400
±(1.5%of rdg +15 digits)400
1
K TYPE NiCr-NiSi probe
3.2.9 Transistor hFE test
Range
Description
Test Condition
hFE
Display read approx hFE value
(0~1000) of transistor under test
(NPN and PNP Type )
Base Current
approx 10uA
Vce approx 3V
3.2.10 Diode test and Audible Continuity Test
Range
Description
Test Condition
Display read approximately
forward Voltage of diode .
Forward DC current
approx 1.5mA
Reversed DC voltage
approximately 3V
Built-in buzzer sounds if
resistance is less than 80Ω.
Open circuit voltage
approx 3V
Overload protection: 250V DC/250Vrms AC.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Profile-PIN-144

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Profile PIN-144 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Profile PIN-144 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info