825484
5
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
8 9© Princess | Multi Capsule Coffee Maker | 01.249454.01.001 User manual
- The water tank is firmly in place.
- A large bowl (250ml size or above) is placed under the dispenser.
8. Press the brew coffee button, wait for the appliance to complete the flush out.
9. After the machine is flushed out, open the lever A1 and empty the cup.
Filling by removing the water tank A3
1. Remove the water tank A3 from the machine.
2. Fill the water tank A3 up to the 'MAX' mark with cold drink water.
3. Insert the water tank A3 slowly on the water tank base and push it to seat the position correctly.
4. Plug the power cord into a wall socket.
5. Press the power button B9. The lights on the buttons will become steady when the machine is warm.
This takes approximately 45 seconds.
Note: before pressing the brew coffee button, make sure that:
- The handle is closed without a capsule inside.
- The water tank is full.
- The water tank is firmly in place.
- A large bowl (250ml size or above) is placed under the dispenser.
6. Press the brew coffee button, wait for the appliance to complete the flush out.
7. After the machine is flushed out, open the lever A1 and empty the cup.
Fill the water circuit manually
Before using the machine for the first time or after long pauses, such as holidays, you may encounter
difficulty in pumping water. To help with this, you can follow a short procedure to prime the pump by
manually filling water into the circuit using the pipe before turning on the machine for the first refill.
See image D and follow the steps below.
1. Remove the water tank A3 and insert the hose into the water inlet A4 at the bottom of the water tank.
2. Inject a small amount of water into the hose.
3. Push the pump down to allow water to enter the coffee machine and force the air out of the pipe to make
the pipe clear.
After above steps, the machine will be able to pump water out normally. If necessary, repeat the steps 2 or
3 times.
USE
Hot Drink Mode
1. Connect the device to the main socket. The Power button B9 will flash twice in red and twice in blue,
indicating that the power is well connected.
2. A single quick press on the Power button B9 will activate the device, indicated by a red light. The
volume Bq and brew Bw buttons will flash in blue for approximately 35 seconds, signaling the
completion of the heating process.
3. Once the volume Bq and brew Bw buttons stop flashing, the device is ready to prepare a hot drink. In
this mode, the power button remains lit in a red light.
4. Press the volume button Bq to set the volume of the drink.
5. Press the brew button Bw for the device to start making your drink.
Cold Drink Mode
1. Connect the device to the main socket. The Power button B9 will flash twice in red and twice in blue,
indicating that the power is well connected.
2. Hold the power button B9 for about 2 seconds until the indication light is turned on in blue light.
3. When the device enters in the cold drink mode, all the three buttons are indicated in steady blue light. In
this mode, the heater is switched off.
Never use the appliance in the immediate surroundings of a
bath, a shower or a swimming pool.
Never drop the appliance and avoid bumping. Excessive
vibrations can lead to loosened connections and can
influence proper functioning of the appliance. Stop using the
appliance if the appliance has been dropped.
Safety hazard due to sharp parts:
There is a sharp needle in the upper side of the capsule
adaptor. Prohibit putting a hand or finger on any part near
that needle after the adaptor is removed.
NOTICE
Risk of damaging the appliance:
Never use aggressive chemical cleaning agents that can
damage the appliance when cleaning the appliance.
Keep the appliance and cord away from heat, direct sunlight,
water, moisture, shap edges etc.
6CAUTION
Do not operate the machine with an empty water tank A3.
Do not open the lever A1 when the machine is brewing.
Thoroughly rinse out the water tank A3 with fresh water
before using it for the first time. Clean the appliance using a
damp cloth only.
BEFORE FIRST USE
Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the
device.
Before using the appliance for the first time or after long pauses, the machine must be flushed out.
There are two ways to fill the water tank: directly into the machine by using for example a jug, or by
removing the water tank.
Filling without removing the water tank A3
1. Raise the water tank cover A2.
2. Fill the tank A3 with cold fresh water.
3. The maximum capacity is 0.8 litre.
4. Low down the tank cover A2
5. Plug the power cord into a wall socket.
6. Press the power button B9. The lights on the buttons will become steady when the machine is warm.
This takes approximately 45 seconds.
7. Press the brew coffee button, wait for the appliance to complete the flush out.
Note: before pressing the brew coffee button, make sure that:
- The handle is closed without a capsule inside.
- The water tank is full.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Princess 249454 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Princess 249454 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Zweeds als bijlage per email.

De handleiding is 3,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info