112227
6
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
7
USING THE IRON
The first time
1. If you are using the iron for the first time, check that the voltage indicated on the underside of the iron
corresponds to the voltage of the circuit to which you intend to connect the iron.
2. Remove any labels and stickers from the iron.
3. Some parts of the iron have been lightly greased; this may cause the iron to give off a little smoke
when it is switched on for the first time. The smoke will stop after a short time. Use ordinary tap water
for steam ironing. However, if you live in a hard water area, we recommend the use of distilled water
for best results.
FILLING THE WATER RESERVOIR
1. Ensure that the appliance is not plugged in.
2. Place the reservoir on a stable surface.
3. Fill the water reservoir (max. 1 litre)
4. You can use tap water. If you live in a hard water area, you can use distilled water instead.
5. Never use vinegar, decalcifying agents or other chemicals.
6. Close the steam reservoir by manually turning the cap clockwise until firmly closed.
FILLING THE WATER RESERVOIR WHEN THE IRON AND/OR WATER RESERVOIR
IS HOT
ATTENTION: when the iron is heating up, the water reservoir is pressurised. Only fill the reservoir when
it is empty and cool.
1. Turn the iron off using the 'iron switch'.
2. Turn the water reservoir off using the 'steam switch'
3. Remove the plug from the socket.
4. Carefully unscrew the cap of the water reservoir (turn 1 to 1
1
/
2
times anticlockwise) until steam can be
heard escaping. Wait until the noise stops. This sound is quite normal and does not mean that anything
is wrong with the appliance.
5. Continue to unscrew the cap carefully until the sound is heard again. Wait once more until the noise
stops. Continue in this fashion until the cap is removed.
6. Wait for a few minutes, then slowly pour warm water into the aperture.
DRY IRONING
To iron without steam, the steam reservoir switch must be in the OFF position.
STEAM IRONING
1. As indicated on the thermostat, steam ironing is only possible at higher ironing temperatures, so set the
thermostat to •• or •••
2. Insert the plug into the electricity socket
3. Set the “steam on/off” switch to “on”. The indicator light will come on.
4. The iron heats up faster than the water tank. If you wish, you can switch the iron on a couple of minutes
later.
5. Select the right temperature using the thermostat.
6. Set the “iron on/off” switch to “on”. The indicator light in the switch and the iron heating indicator
light will come on.
7. After a few minutes, the iron heating indicator light will go out. This means that the iron plate has
reached the right temperature.
8. When the indicator light on the switch goes out it means that the water reservoir has heated up and that
there is enough steam. You can now start to steam iron.
SWITCHING ON THE STEAM
1. Ensure that there is water in the reservoir and that the thermostat is set to “steam”.
2. Press the uppermost button to turn on the steam.
3. IMPORTANT: you may have to press the bottom button (steam jet) a few times to remove
all the air from the system before the pump will start.
4. Pressing the button on top will cause the iron to emit steam. You can turn the steam off
by briefly pressing the bottom button halfway in.
5. Pressing the bottom button all the way in produces a jet of steam.
6. The iron can be used to steam iron horizontally or vertically (e.g. to clean curtains and
clothing).
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Princess 2411 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Princess 2411 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info