391294
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
POWXQ5104 EN
Copyright © 2012 VARO NV P a g e | 8 www.varo.com
Move the spring, holding the cole brush aside, remove the wire connector and pull out the cole,
install the new one (don’t forget to reposition the spring) and close the brush caps again.
Let the machine run freely without load for a while, allowing the coles to fit right (sparking may
occur, but is not harmful and will disappear after a while)
If you are not confident to perform this by yourselves, ask a qualified person to do it for you.
7.4 Mounting the side handle (Fig 5)
The side handle can be used for both left-hand and right-hand control.
Fasten the side handle for left-hand operation on the right-hand side of the machine.
Fasten the side handle for right-hand operation on the left-hand side of the machine.
Fasten the side handle for upright working at the top of the machine.
Make sure that the side handle is fastened properly and cannot loosen
unexpectedly.
8 OPERATION
8.1 Pay special attention when starting the machine
Clamp the workpiece and make sure that the workpiece cannot slide from under the
machine during the cutting activities.
When working with the machine, always hold it firmly with both hands and provide for a
secure stand.
Always direct the cable to the rear away from the machine to avoid cutting the electric
cable.
Insert the mains plug only when the machine is switched off.
Apply the machine to the workpiece only when switched on and when it has reached full
speed.
When cutting into walls! Make sure to avoid hidden electrical wiring (electric shock!) or
pipes (water, gas...).
Make sure the grinding/cutting disc is not contacting the work piece before the switch is
turned on.
Keep hands away from rotating parts.
Never use the machine for grinding magnesium workpieces.
8.2 Switching On (Fig 6)
To switch on:
POWXQ5104: press the “lock on” safety knob at the left side of the handle, keep it pressed
then squeeze the on/Off switch.
Allow the disc to reach full speed before you touch the workpiece.
8.3 Switching Off (Fig 7)
To switch off:
POWXQ5104 : simply release the ON/OFF switch, the machine will be switched OFF.
The disc will gradually slow down and eventually stop after a few seconds.
Do not put the machine down when the disc is still turning.
Never unplug a running machine, always switch off first before pulling out the
plug!
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus pow xq5104 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus pow xq5104 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus pow xq5104

Powerplus pow xq5104 Gebruiksaanwijzing - Nederlands - 13 pagina's

Powerplus pow xq5104 Gebruiksaanwijzing - Deutsch - 13 pagina's

Powerplus pow xq5104 Gebruiksaanwijzing - Français - 13 pagina's

Powerplus pow xq5104 Aanvulling / aanpassing - Alle talen - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info