582126
4
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
POWXQ9100 EN
Copyright © 2011 VARO P a g e | 4 www.varo.com
4. Release the rear stability foot lock lever and pivot until it “clicks” into the stored position.
Release the rear leg lock lever and move the rear leg into the stored position. Lock the
rear leg lock lever.
5. The rear carry handle can be used to carry POWXQ9100 when in a folded and upright
orientation. See figs 11 & 12.
6 OPERATION
6.1 Clamping
1. Place the workpiece against the front fixed jaw (2). Slide the moving jaw (2) up against
the workpiece. The moving jaw can either be moved by hand or by using the foot pedal.
2. Slide down the lock / unlock switch to engage the lock. Press down on the foot pedal to
clamp the workpiece. See fig 13.
WARNING: Maximum allowable force on the foot pedal is 100Kg. Do not
stand or jump on the product, as you can cause injury or damage to the
product.
6.2 Releasing
1. Slide up the lock / unlock switch to release the lock.
2. Press down on the foot pedal until it “clicks” to release the clamp.
3. Slide the moving jaw away from the workpiece. See fig 14.
NB: You will need to exert a similar pressure on the foot pedal as was used
to initially clamp the workpiece.
WARNING: Ensure the workpiece is supported to avoid it falling when the
jaw is released.
6.3 Clamping on one side of the jaw
On occasion large or awkward workpieces can only be clamped on one side of the jaws. If this
is the case then avoid excessive use of clamping force. See fig 15.
6.4 Clamping square tube
Clamping square tubing or similar material either on the diagonal or flat side using the grooves
in the jaw pads for alignment.
6.5 Clamping square pieces vertically
On occasion tubing or other square workpieces need to be clamped vertically on the centre of
the jaws. Use the grooves on the jaw pad to align the workpiece. A hole accommodates
workpieces up to 40mm width to be clamped vertically. See fig 16.
6.6 Clamping large objects (clamping range >450mm)
To clamp larger workpieces the moving jaw can be reversed to increase the clamping range,
up to 956mm.
1. Remove the moving jaw by sliding it from the tracks.
2. Rotate the moving jaw 180° and re-assemble. See fig 17.
WARNING: Whenever clamping workpieces up to the maximum clamping
range ensure the work piece rests down on the moving jaw and remains
parallel to it.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXQ9100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXQ9100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWXQ9100

Powerplus POWXQ9100 Gebruiksaanwijzing - Nederlands - 5 pagina's

Powerplus POWXQ9100 Gebruiksaanwijzing - Deutsch - 5 pagina's

Powerplus POWXQ9100 Gebruiksaanwijzing - Français - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info