481030
19
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
POWXQ5360 EN
Copyright © 2010 VARO P a g e | 19 www.varo.com
Weight
28.5 kg
11 SOUND EMISSION
Noise emission values measured according to relevant standard.
Acoustic pressure level LpA
91 dB(A)
K = 3 dB(A)
Acoustic power level LwA
104 dB(A)
K = 3 dB(A)
ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
12 CLEANING AND MAINTENANCE
Before performing any work on the equipment, pull the power plug.
12.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach the inside of the power tool!
12.2 Lubrication
All motor bearings are permanently lubricated at the factory, and do not require any additional
lubrication. Use graphite or silicone to lubricate all mechanical parts of the table saw where a
pivot or threaded rod is present. Dry lubricants do not hold sawdust like oil or grease.
13 INFORMATION ABOUT TRANSPORTING AND LIFTING
POSITIONS
When transporting the machine use only transportation devices and do never use guards
for handling, lifting or transportation.
During transportation the upper part of the saw blade should be covered; for example by
the guard.
Always lift your tool at the bottom plate with two persons to avoid back injuries.
14 TROUBLESHOOTING GUIDE
Sympton
Possible causes
Corrective action
The saw will not start
The saw is not plugged in.
The fuse has blown or the
circuit breaker has tripped.
The cord is damaged.
Plug in the table saw.
Replace the fuse or reset the
circuit breaker.
Have the cord replaced by a
qualified electrician.
The saw does not make
accurate 45° or 90° rip
cuts
The positive stop is not
adjusted correctly.
Check the blade with the square
and adjust the positive stop.
The blade tilt pointer is not
set correctly.
Check the blade with the square
and adjust the positive to zero.
The rip fence is not properly
aligned.
Align the rip fence with the miter
gauge slot.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Powerplus-POWXQ5360

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXQ5360 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXQ5360 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWXQ5360

Powerplus POWXQ5360 Gebruiksaanwijzing - Nederlands - 23 pagina's

Powerplus POWXQ5360 Gebruiksaanwijzing - Deutsch - 22 pagina's

Powerplus POWXQ5360 Gebruiksaanwijzing - Français - 21 pagina's

Powerplus POWXQ5360 Aanvulling / aanpassing - Alle talen - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info