582103
7
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
POWXG7512 EN
Copyright © 2015 VARO P a g e | 7 www.varo.com
when leaving the product unattended.
before freeing a blocked tool.
after hitting a foreign body.
when the product vibrates abnormally.
7 ASSEMBLY
7.1 Handle bar assembly
1. Align the lower hand bars (7) with the supports (10). Make sure the holes in the lower
handle bars correspond those in the supports (10) and secure the bars with one screw
(11) each to the support (10). (See Fig. 1a, 1b).
2. Align the middle handle bars (6) to the lower ones (7). Make sure the holes of the handle
bars (6, 7) correspond and secure them with one mounting set (12) mounting screw (12a)
and nut (12b) on each side. (See Fig. 2).
3. Slide the cord strain relief (4) onto the upper handle bar (5). (See Fig. 3).
4. Align the upper handle bar (5) with the middle handle bar (6) and secure them with one
mounting set (12) on each side. (See Fig. 4).
5. Fix the cord with the cord clips (13) to the handle bar (Fig. 5).
7.2 Grass catcher assembly
WARNING! Do not attempt to use the product without the grass catcher
attached. Danger of flying objects!
WARNING! The product must be switched off and the cutting device must
have stopped rotating before you attach or empty the grass catcher!
WARNING! Never use the scarifier without the grass catcher bag securely
fitted.
NOTE: A full grass catcher will reduce the performance of this product.
Attach the grass catcher (3) to the product before operation.
1. Open the deflector guard (9), hold it in position and align the hooks on the grass catcher
(3) with the hinges to hang it onto. (See Fig. 6).
2. Empty the grass catcher (3) frequently during use. Do not wait until it is completely full.
We recommend emptying it when it is half full.
3. Lift the deflector guard (9) and pull the grass catcher (3) off the hinges to remove it.
4. Empty the collected material onto a compost heap and reattach it onto the product.
7.3 Cable routing
Always route the electric main cable away from the work area to prevent it from coming
into contact with the cutting device. Plan your route before starting work. Start your work at
the nearest point to the electrical outlet, and work away from it. This will keep the cable
away from the cutting device and avoid it being accidentally cut. Keep the cable over your
shoulder for added safety.
For cord strain relief of the cable, form a loop of the end of the main cable and bring this
through the opening at the handle and insert it into the cord strain relief.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Powerplus-POWXG7512

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXG7512 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXG7512 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWXG7512

Powerplus POWXG7512 Gebruiksaanwijzing - Nederlands - 14 pagina's

Powerplus POWXG7512 Gebruiksaanwijzing - Deutsch - 15 pagina's

Powerplus POWXG7512 Gebruiksaanwijzing - Français - 14 pagina's

Powerplus POWXG7512 Aanvulling / aanpassing - Alle talen - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info