582074
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
POWXG4035 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
9 ASSEMBLY
You new blower vac requires very little assembly work before it is ready for use. (Fig. 1)
ATTENTION ! The 2 supplied tube parts have to be mounted otherwise the machine will NOT
work ! (build in safety switch !)
9.1 safety switch
Your blow-vac has a build in safety switch that prevents the machine from being started in
case the supplied tubes are not mounted.
9.2 Shoulder strap:
The shoulder strap will be supplied inside the leaf bag. Take the shoulder strap out of the leaf
bag, open the snap fastener, thread the strap through the metal clip on the top of the motor
casing and then close the snap fastener. To adjust the shoulder strap to the required length,
simply slide the adjustable strap buckle forward or backwards.
9.3 Leaf bag (Fig. 2)
To secure the leaf bag to the machine, simply attach the buckle to the top tube section
and pull the expanding bag opening over the leaf discharge point on the bottom of the motor
casing. Then tighten the securing belt.
10 OPERATION
Ensure that the blower vac is only connected to conventional sockets with a 240V alternating
current supply. Only use extension cables if they are really necessary. The use of extension
cables may cause a drop in voltage, which will result in the machine not performing to its peak
or the motor overheating.
10.1 Switching ON/OFF
To switch on the blow/vac push in the on/off trigger switch (9). And hold
to switch off the machine, release the on/off trigger switch.
10.2 Speed regulation
You can vary the speed by turning the switch (10) from 1 (low speed) to 6 (high speed)
10.3 Use/Operation.
The easiest way to use the blower vac is to place the shoulder strap in a comfortable position
over your shoulder and hold the rear handle at hip height so that the majority of the machine’s
weight rests on the rollers.
When using the blower vac to pick up leaves it is best to move the machine on the rollers. This
ensures that the blower vac is at the perfect height above the ground. The blower vac is
designed only to pick up leaves. To avoid machine damage that is not covered by the warranty,
do not use it to pick up branches, stones or other hard materials.
When using the machine as a leaf blower always work away from solid objects such as walls,
fences, etc. Whilst you work do not place the blower vac tube too close to the leaves. The
machine will be more effective if you keep it at a certain distance away from the leaves and
blow the leaves forwards.
10.4 Switching operating mode (Fig. 3)
To switch the machine from blower mode to vacuum mode, simply switch it off at the main
switch and move the function selector lever to the other position.
10.5 Leaf bag (Fig. 4)
Note: Before you remove and empty the leaf bag ensure that the machine has been
disconnected from the mains power supply.
To empty the leaf bag simply open the zip fastener, empty the bag and then close the zip
fastener again.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXG4035 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXG4035 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWXG4035

Powerplus POWXG4035 Gebruiksaanwijzing - Nederlands - 8 pagina's

Powerplus POWXG4035 Gebruiksaanwijzing - Deutsch - 8 pagina's

Powerplus POWXG4035 Gebruiksaanwijzing - Français - 8 pagina's

Powerplus POWXG4035 Aanvulling / aanpassing - Alle talen - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info