582100
15
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
POWXG3025 EN
Copyright © 2015 VARO P a g e | 15 www.varo.com
11.4.2 Grass clearing using a grass blade
Grass blades and grass cutters must not be used on woody stems.
A grass blade is used for all types of tall or coarse grass.
The grass is cut down with a sideways, swinging movement, where the movement from right-
to-left is the clearing stroke and the movement from left-to- right is the return stroke. Let the
left-hand side of the blade (between 8 and 12 o’clock) do the cutting.
If the blade is angled to the left when clearing grass, the grass will collect in a line, which
makes it easier to collect, e.g. by raking.
Try to work rhythmically. Stand firmly with your feet apart. Move forward after the return stroke
and stand firmly again.
Let the support cup rest lightly against the ground. It is used to protect the blade from hitting
the ground.
Reduce the risk of material wrapping around the blade by following these instructions:
Always work at full throttle.
Avoid the previously cut material during the return stroke.
Stop the engine, unclip the harness and place the machine on the ground before you start to
collect the cut material.
11.4.3 Grass trimming with a trimmer head
11.4.3.1 Trimming (Fig. 29)
Hold the trimmer head just above the ground at an angle. It is the end of the cord that does the
work. Let the cord work at its own pace. Never press the cord into the area to be cut.
The cord can easily remove grass and weeds up against walls, fences, trees and borders,
however it can also damage sensitive bark on trees and bushes, and damage fence posts.
Reduce the risk of damaging plants by shortening the cord to 10-12 cm and reducing the
engine speed.
11.4.3.2 Clearing (Fig. 30)
The clearing technique removes all unwanted vegetation. Keep the trimmer head just above
the ground and tilt it. Let the end of the cord strike the ground around trees, posts, statues and
the like.
CAUTION! This technique increases the wear on the cord.
The cord wears quicker and must be fed forward more often when working against stones,
brick, concrete, metal fences, etc., than when coming into contact with trees and wooden
fences.
When trimming and clearing you should use less than full throttle so that the cord lasts longer
and to reduce the wear on the trimmer head.
11.4.3.3 Cutting (Fig. 31)
The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower. Keep
the cord parallel to the ground when cutting. Avoid pressing the trimmer head against the
ground as this can ruin the lawn and damage the tool.
Do not allow the trimmer head to constantly come into contact with the ground during normal
cutting. Constant contact of this type can cause damage and wear to the trimmer head.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXG3025 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXG3025 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWXG3025

Powerplus POWXG3025 Gebruiksaanwijzing - Nederlands - 22 pagina's

Powerplus POWXG3025 Gebruiksaanwijzing - Deutsch - 22 pagina's

Powerplus POWXG3025 Gebruiksaanwijzing - Français - 22 pagina's

Powerplus POWXG3025 Aanvulling / aanpassing - Alle talen - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info