582100
5
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
POWXG3025 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
5 GENERAL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
5.1 Work area
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a tool. Distractions can cause you to
lose control.
5.2 Personal safety
Stay alert, watch what you are doing and use common sense when operating a tool. Do
not use a tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating tools may result in serious personal injury.
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used whenever conditions require
will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying tools with your finger on the switch or plugging in tools that have the switch on
invites accidents.
Remove any adjusting key or wrench before turning the tool on. A wrench or a key left
attached to a rotating part of the tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving
parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.3 Engine tool use and care
Use the correct tool for your application. The correct tool will do the job better and safer at
the rate for which it was designed.
Store idle tools out of the reach of children and do not allow persons unfamiliar with the
tool or these instructions to operate the tool. The tools are dangerous in the hands of
untrained users.
Maintain tools. Check for misalignment or sticking of moving parts, breakage of parts and
any other condition that may affect the tool’s operation. If damaged, have the tool repaired
before use. Many accidents are caused by poorly maintained tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
Use the tool, accessories and tool bits etc., in accordance with these instructions and in
the manner intended for the particular type of tool, taking into account the working
conditions and the work to be performed. Use of the tool for operations different from
intended could lead to a hazardous situation.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXG3025 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXG3025 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWXG3025

Powerplus POWXG3025 Gebruiksaanwijzing - Nederlands - 22 pagina's

Powerplus POWXG3025 Gebruiksaanwijzing - Deutsch - 22 pagina's

Powerplus POWXG3025 Gebruiksaanwijzing - Français - 22 pagina's

Powerplus POWXG3025 Aanvulling / aanpassing - Alle talen - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info