517142
11
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
POWXG1006 EN
Copyright © 2015 VARO P a g e | 11 www.varo.com
11.2 To switch on:
Press the safety lock-off (2) and ON/OFF switch on (13).
Place the lowest claw (Fig 4, J) on the wood . Raise the chain saw by the rear grip (1 ) and
saw into the wood. Move the chain saw back a little and place the claw further down.
Be careful when sawing splintered wood as pieces of wood may be ripped off.
11.3 Wood under tension.
Fig, 11a: Top side of under tension
Danger: Tree will rear up!
Fig, 11b: Bottom side of trunk under tension
Danger: Tree will move downwards!
Fig, 11c: Thick trunks and high tension
Danger: Tree will move suddenly and with immense force!
Fig, 11d: Both sides of trunk under tension
Danger: Tree will move sideways.
11.4 Felling trees
To fell trees, observe all the safety regulations and proceed as follows:
Remember!
Danger zone: Falling trees can bring down other trees with them. The danger zone is therefore
twice the length of the tree being felled. (Fig, 12)
Felling trees is dangerous and requires practice. If you are a beginner or
inexperienced, do not try to teach yourself but seek professional training.
(Fig, 13)
Falling direction:
First estimate the direction of fall, taking into account the centre of gravity of the crown and
the wind direction. The chain saw must be running before it comes into contact with the
wood. Switch on the chain saw. Saw an undercut in the tree in the direction of fall and
then make a horizontal cut (back cut) on the side opposite to the undercut.
Make the undercut: This will give the tree a direction and guidance.
Check the direction of fall: If you have to correct the undercut, always re-cut over the
entire width.
Call now Timber!
Only now make the back cut, which must be higher than the sole of the undercut. Insert
wedges in time.
Leave the bridge in place as it will function as a hinge. If you cut through the bridge, the
tree will fall randomly.
Fell the tree by driving a wedge into the back cut, not by sawing through it .
When the tree falls, step back and watch the crown.
Wait for the crown to stop swinging. Do not continue working under branches which have
got stuck.
When the chain saw is used to cut trees that exceed its power limits the chain can get stuck. If
the chain gets jammed, release it using a wooden wedge.
Do not fell trees:
If you can no longer distinguish details within the danger zone, e.g. owing to fog, rain,
snow drifts or twilight.
If the direction of fall cannot be reliably estimated owing to wind or gusts of wind. Felling
work on sloping ground, black ice, frozen or dewy ground is safe only if you can get a firm
foothold.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Powerplus-POWXG1006

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXG1006 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXG1006 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWXG1006

Powerplus POWXG1006 Gebruiksaanwijzing - Nederlands - 15 pagina's

Powerplus POWXG1006 Gebruiksaanwijzing - Deutsch - 15 pagina's

Powerplus POWXG1006 Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info