675262
12
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
POWX510 EN
Copyright © 2015 VARO P a g e | 12 www.varo.com
12.6 Cleaning / adjusting / replacing spark plug
Easy starting and optimum running of the engine is only possible when the spark plug is clean
and correctly mounted.
Remove the spark plug cable from the spark plug.
Place spark plug key on the spark plug and unscrew it.
The spark plug should be light to dark brown (Standard electrode color: Tan Color). A
black spark plug indicates that the mixture is too rich (choke used for too long, frequent
running for short periods).
Clean the spark plug with a spark plug brush. (This has copper bristles - do not use a steel
brush, otherwise you will damage the spark plug!)
Check the gap between the electrodes with a gauge. It should be between 0.6 and 0.8
mm. If necessary, adjust the gap by carefully bending the electrode. If the gap is too wide,
the ignition spark is too weak or may be completely absent. If the gap is too small, the
electrode becomes burnt, and the plug will not spark reliably.
If the electrode is burnt, or the ceramic insulator is damaged, replace the spark plug. Use
spark plugs with the same charasteristics.
Re-place the spark plug in its housing and screw it tight by hand. The spark plug must
allow itself to be screwed in very easily. - otherwise unscrew again, check the thread for
foreign bodies and screw in again (straight).
Use a plug spanner to tighten the hand-tightened spark plug by a further quarter revolution
and no more, otherwise the thread will be damaged.
Re-place the spark plug cable on the spark plug and ensure that it is seated tightly.
12.7 Muffler screen
The engine and muffler will be very hot after the engine has been run.
Avoid touching the engine and muffler while they are still hot with any part of your body or
clothing during inspection or repair.
Remove the muffler protector and muffler screen.
Clean the carbon deposits out of the muffler screen using a wire brush.
Check the muffler screen. Replace it if damaged.
Install the muffler screen and muffler protector.
13 SERVICE / REPAIRS
Repairs may be carried out by specialized personnel only. For this, use a specialist
workshop.
For repairs, only parts may be used which correspond to the original machine details. This
machine contains electrical and mechanical parts which are essential for protection
against sources of danger.
14 TECHNICAL DATA
GENERATOR
Type
Brush
Voltage Regulator
AVR
Max. Output
2200 W
Rated Output
2000 W
AC Voltage
230V
Frequency
50Hz
Phase
single
Power Factor
Cosφ=1.0
Degree of Protection
IP23M
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX510 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX510

Powerplus POWX510 Gebruiksaanwijzing - Nederlands - 17 pagina's

Powerplus POWX510 Gebruiksaanwijzing - Deutsch - 17 pagina's

Powerplus POWX510 Gebruiksaanwijzing - Français - 17 pagina's

Powerplus POWX510 Aanvulling / aanpassing - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info