675037
9
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
POWX221 EN
Copyright © 2017 VARO P a g e | 9 www.varo.com
Now use the 2 keys: one for the flange and one for the nut and now clamp it.
Now put the inlay back in the bench and fasten it.
7.8 Mounting the push stick holders
Mount both push stick holders on the side of the machine using the bolts and rings supplied.
7.9 Use of the mitring set-up Fig. A
By turning the handle at the side of the machine you can adjust the saw blade to a maximum
of 45° (4).
8 OPERATION
There are two types of sawing methods:
Lengthwise sawing : Sawing the workpiece in the length of the wood grain.
Cross-cutting or cutting off : Sawing off the workpiece crosswise.
If it concerns a panel, we do not usually distinguish between the wood grain, but we name the
method where we saw off a part of the width of the panel (lengthwise sawing) and when we
cut off the length (cross-cutting or cutting-off).
For both sawing methods one of the fences must be used. Therefor never
saw without a fence!
Attention! Before you start sawing, first check the following:
1. Is the saw blade secured?
2. Are all the locking handles secured?
3. Is the fence parallel to the saw blade?
4. Is the protective cap working properly?
5. Are you wearing safety goggles?
6. Is the saw blade not rubbing against anything?
It is absolutely necessary to take these points into consideration before you
start work!
8.1 Lengthwise sawing
Secure the fence to the correct measuring position and remove the cut-off guide from the
bench carriage.
Turn the saw blade approximately 2 mm higher than the total thickness of the wood to be
sawn.
Press the wood lightly towards the bench and let it glide against the cut-off fence.
Remain at least 3 cm. from the front of the saw blade before you switch on
the engine. The side of the wood which is against the fence must be
completely straight. Keep your hands at least 10 cm away from the saw
track to be followed.
Switch on the engine and wait until the saw blade has reached the maximum number of
revolutions before you start sawing.
While you press the wood against the bench and the fence, you can carefully push the
wood through the saw blade without forcing it.
Never pull the workpiece backwards. If necessary, switch off the engine first without
altering the position of the workpiece.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX221 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX221 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX221

Powerplus POWX221 Gebruiksaanwijzing - Nederlands - 14 pagina's

Powerplus POWX221 Gebruiksaanwijzing - Deutsch - 15 pagina's

Powerplus POWX221 Gebruiksaanwijzing - Français - 14 pagina's

Powerplus POWX221 Aanvulling / aanpassing - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info