480960
7
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
POWX154 EN
Copyright © 2016 VARO P a g e | 7 www.varo.com
8.5 Mounting the chuck (fig. 8 & 9)
Open the safety guard (7).
Slide the chuck spindle (30) into the drive spindle.
The chuck (6) must be removed when working with cone drills. In order to remove the chuck,
proceed as follows:
Open the safety guard (7).
Lower the chuck until the hole in the drive spindle (31) becomes visible. Hold the chuck in
this position.
Raise the table until it is approximately 2 cm below the chuck.
Turn the chuck by hand to align the hole in the drive spindle with the holes in the feed
spindle.
Release the chuck by driving the wedge (32) into the hole in the drive spindle.
8.6 Inserting and removing a drill (fig. 10)
Open the safety guard (7).
Open the chuck (6).
Insert the drill into the chuck.
Fasten the chuck by hand.
Fasten the chuck firmly by inserting the chuck key in one of the holes in the side of the
chuck and turning it clockwise.
Shut the safety guard.
In order to remove a drill, proceed in reverse order.
Before inserting or removing a drill, always pull the plug from the wall
socket.
8.7 Setting the depth stop (fig. 11)
The depth stop is used to set the maximum drilling depth.
Set the required drilling depth by rotating the depth stop wheel (33) to the defined value.
8.8 Adjusting the table (fig. 12)
The table can be height-adjusted, turned and toppled.
Height adjustment:
Slacken the locking handle (34).
Turn the handle (19) to adjust the table (5) to the required height.
Tighten the locking handle.
Turning:
Slacken the locking handle (34).
Turn the table (5) to the required position.
Tighten the locking handle.
Toppling:
Slacken the locking screw (35).
Topple the table (5) to the required position.
Tighten the locking screw.
8.9 Adjusting the table extenders (fig. 13)
Using the table extenders you can support long workpieces.
Slacken the wing nuts (36).
Slide the extender (37) outward.
Tighten the wing nut.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX154 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX154 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX154

Powerplus POWX154 Gebruiksaanwijzing - Nederlands - 11 pagina's

Powerplus POWX154 Gebruiksaanwijzing - Deutsch - 12 pagina's

Powerplus POWX154 Gebruiksaanwijzing - Français - 12 pagina's

Powerplus POWX154 Aanvulling / aanpassing - Alle talen - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info