645096
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
POWX1415 EN
Copyright © 2016 VARO P a g e | 5 www.varo.com
Insert the saw blade into the chuck to the deepest position and release the clamp to lock
the blade in position.
Pull on the blade to ensure it’s securely fastened.
Note: Do not operate the reciprocating saw if the adjustable shoe is not
installed.
Before plugging in power cord, always pull on the blade (6) to make sure it
is securely locked in the clamp. Failure to do so may result in serious
injury.
8 OPERATION
8.1 Switch on/off (3)
Connect the plug to the power supply.
Turn on or turn off the tool by squeezing or releasing the ON/OFF switch trigger (3).
For continuous operation just press the lock-on button (4) on the left side of the handle.
The lock-on button can be release by pressing the switch trigger again.
8.2 General cutting
Make sure the saw blade is clear of any foreign material and the power cord or extension
cord are out of the path of the blade.
Be sure the material to be cut is held firmly. Small work pieces should be securely
clamped in a vise or clamped to the work bench.
Make out a cutting line.
Hold the saw firmly in front and clearly away from you.
Switch on the tool and wait until the saw has reached its full speed.
Place the shoe on the work piece and begin to saw.
NOTE: Use only enough pressure to keep the saw cutting. Allow the blade
and the saw to do the work.
WARNING! Make sure the saw blade does not touch the work piece until the
saw reaches its maximum speed. Failure to do so would causes loss of
control and result in serious injury.
WARNING! Use of excessive pressure that causes bending or twisting of
the blade may cause the blade to break.
8.3 Metal cutting
Blades specifically designated for cutting metals must be used for this
purpose.
When cutting metal material such as sheet steel, pipe, steel rods, aluminum, brass and
copper etc., be careful not to bend or twist the blade and do not force the cutting action.
It’s recommended that you use cutting oil to lubricate the cutting surface to avoid the blade
from overheating. Following the general cutting procedure as described above.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX1415 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX1415 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX1415

Powerplus POWX1415 Gebruiksaanwijzing - Nederlands - 8 pagina's

Powerplus POWX1415 Gebruiksaanwijzing - Deutsch - 9 pagina's

Powerplus POWX1415 Gebruiksaanwijzing - Français - 8 pagina's

Powerplus POWX1415 Aanvulling / aanpassing - Alle talen - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info