POWX1386 EN
Copyright © 2018 VARO 1 www.varo.com
SOLDERING GUN
POWX1386
1 APPLICATION
Soldering gun is suitable for soldering on printed circuit boards, soldering of plastic and for
burning work on wood and leather. All other applications are specifically excluded. It is not
designed for commercial use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION
1. Tip
2. Fixing screw
3. LED work light
4. Switch
5. Handle
6. Power supply lead
3 OPERATION
3.1 Connection
This soldering gun may only be connected to single phase alternating current. The voltage
of the electric power supply on the network must correspond with the instructions on the
type plate of the machine. Connection to a socket without an earthed contact is also
possible since the double insulation complies with the standard requirements according to
DIN EN60335-1:2002.
3.2 Switching on
CAUTION’ Use this appliance only for work which is included in the
established operative range
▪ Switch-on: press switch (4) and leave pressed. Status indicator (3) lights up when
the appliance is switched on.
▪ Switch-off: release switch 4.
▪ The duration of the current supply determines the heat of the solder (longer current
supply = higher solder temperature). While soldering, do not keep the switch pressed
for too long. Determine the necessary duration for current supply in practice through
control of the temperature of the solder. As soon as you release the switch, the
temperature of the solder is automatically reduced. A subsequent turning on of the
switch ensures a fast increase in temperature. Constant solder temperature
guarantees optimum solder quality, avoids running the soldering tip at temperatures
which are too high and extends the service life of the appliance.
