491713
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
POWX01250 EN
Copyright © 2016 VARO P a g e | 5 www.varo.com
The supply cable is intended for normal conditions of use. It is designed to resist normal
mechanical stresses. Do not make loops in the cable or put objects which might damage it
on top of it. Also make sure that the cable does not come into contact with any liquid or
any source of heat and that it is not used in a damp environment. Do not withdraw the plug
from the socket by pulling on the cable.
Before any maintenance operation, manipulation or any intervention on the machine (such
as assembly, disassembly, adjustment, etc), always disconnect the power supply plug and
wait until the machine has come to a standstill.
It is compulsory to wear certified gloves and protective goggles when using the device.
Never use the machine without its protective guard and “spark guards”.
Always check that the work supports are firmly fixed before using the machine.
As the wheel wears down, adjust the work support and screen slide:
1.5mm between the work support and the wheel
2mm between the slide and the wheel
When using the grinder, stand in a stable, balanced position, without stretching, and keep
children at a distance.
Never leave the machine running unsupervised. Keep the workshop clean and tidy.
Before use, make sure the grinding wheels are not damaged or cracked. If there is the
slightest doubt, replace at once (a damaged grinding wheel can fly apart at speed).
Replacement grinding wheels must be identical in characteristics and dimensions.
This machine is not suitable for grinding soft substances such as lead, magnesium or light
alloys.
7 OPERATION
7.1 Assembly instructions
Before use, the eye shields/spark arresters must be fitted to the grinder. Remove both eye
shields from packaging, position the shields over the two mounting brackets above the
grinding wheels with the flanges of the spark arrester facing away from you, fix with the screw
and washer provided. At this stage do not fully Tighten.
7.2 Work rest adjustment
Take the work rest out of the package, fix on the grinder with the knob and washer provided
as shown in dia3. The gap between the rests and the wheels should be checked before use.
Measure the gap between the grinding wheel and the rests; this should be as small as
possible not greater than 2 mm, if not, loosen the two knobs on each of the rests, set the
correct gap and fully tighten. The gap must be maintained as the wheel wears.
7.3 Operating
Make sure grinder is securely mounted; mounting holes are provided in the base of the grinder
for this purpose, but the screws are not provided. Plug in the mains supply and push the on/off
switch right to the on position. Switch off and unplug the grinder when not in use.
7.4 Changing grinding wheels
To change the grinding wheels, first unplug from mains supply then remove the eye shield
brackets, then undo and remove the three screws holding the wheel guard covers in place.
Remove the cover. Undo and remove the two wheels retaining nuts (a). You may have to hold
the wheel and give the spanner a firm tap with a soft headed hammer to release the nut, take
off the large domed washer(b), paper washer(c) and remove the wheels(d).
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX1250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX1250 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX1250

Powerplus POWX1250 Gebruiksaanwijzing - Nederlands - 9 pagina's

Powerplus POWX1250 Gebruiksaanwijzing - Deutsch - 9 pagina's

Powerplus POWX1250 Gebruiksaanwijzing - Français - 9 pagina's

Powerplus POWX1250 Aanvulling / aanpassing - Alle talen - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info