675007
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
POWX07565T EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
9.3 Clamping the work piece
Make sure the work piece can’t be catapulted. The clamp(12) is the most perfect gadget to
avoid this.
Press the work piece against the fence (4) and between the clamp
Tighten the clamp (12) clockwise to secure the work piece.
9.4 Horizontal mitre angle
The horizontal mitre angle can be set in the range from -45° to 45°. The horizontal mitre angle
scale shows the currently set in degrees.
Pull up the turn table lock release lever (11) to make the turn table (5) free.
Loosen the locking knob (6) at the top of the guide rail.
Push the lever (6).
Rotate the saw table (5) to the required angle ( to the right or to the left). The required
angle can be read of the scale flute (8).
Tighten the locking knob (6) clockwise.
When you have moved the grip for turning table (6) to the position where the mitre angle
pointer points to the desired angle on the mitre angle scale, release the turn table lock
release lever.
9.5 Adjusting of the cutting angle (Fig. 1)
Position the saw in the lower position and block it with the blocking pin.
Now hold the try square (90°) against the guide rail and the saw blade. The latter must
make complete contact with the try square. If this is not the case, then you can adjust the
angle by loosening the counter nut and adjust with adjustment bolts until the angle
between the blade and the turn table equals 90°.
To carry out this step, use the delivered key for loosening the screws. Do not forget to re-
tighten the screws afterwards.
9.6 Vertical bevel angle
The vertical bevel angle can be set in the rang of 0° to 45°. The vertical bevel scale shows the
currently set in degrees.
Loosen the locking lever(22), if tightened.
Swing the tool arm with the handle to the required angle.
Tighten the locking lever (22).
9.7 Slide lock adjustment
To unlock and lock the slide bar (14), turn the slide bar lock knob (23) counterclockwise or
clockwise
9.8 Switching ON / OFF
For your safety use both hands to switch the power tool on and off.
Connect the power tool to the power supply.
Pull the on/off switch (16) in the direction of the handle. The saw blade rotates as long as
you keep the switch engaged.
When you want to turn off the machine, you have to release the on/off switch (16).
9.9 Laser (13)
Your machine is equipped with a laser.
The laser helps you to cut the work pieces at the correct place.
9.10 Dust bag
To attach the dust bag (20), fit it onto the dust extraction adapter. When the dust bag is about
half full, remove the dust bag from the tool and empty it.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX07565T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX07565T in de taal/talen: Engels als bijlage per email.

De handleiding is 0,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX07565T

Powerplus POWX07565T Gebruiksaanwijzing - Nederlands - 13 pagina's

Powerplus POWX07565T Gebruiksaanwijzing - Deutsch - 13 pagina's

Powerplus POWX07565T Gebruiksaanwijzing - Français - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info