645095
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
POWX0396 EN
Copyright © 2016 VARO P a g e | 5 www.varo.com
When removing the saw blade (10), follow the above procedure in reverse order.
Before plugging in power cord, always pull on the blade (10) to make sure it
is securely locked in the clamp. Failure to do so may result in serious
injury.
8 OPERATION
8.1 Switch on/off (4)
Connect the plug to the power supply.
Turn on or turn off the tool by squeezing or releasing the ON/OFF switch trigger (4).
For continuous operation just press the lock-on button (5) on the left side of the handle.
The lock-on button can be release by pressing the switch trigger again.
8.2 Variable speed (7)
By turning the speed adjustment dial (7) forward or backward, you can get the variable
speed.
The speed should be adapted to the material being cut in general, higher speeds will allow
you to cut work-pieces faster but the service life of the blade will be reduced.
Position 1 denotes the lowest speed. Position MAX denotes the highest speed.
8.3 To change position of the pivot shoe assembly (Fig 2)
Unplug your saw.
WARNING: Failure to unplug your saw could result in accidental starting
causing serious injury.
Loosen the both cap screws (8) in the gear frame with hex key.
Reposition pivot shoe (1) assembly in or out.
Retighten both cap screws (8) securely. Do not over tighten cap screws (8).
Remove hex key.
WARNING: Cutting into electrical wiring in walls can cause blade, blade
clamp, and saw bar assembly to become electrically live. Do not touch
metal parts when cutting into a wall; grasp only the insulated gripping
surfaces provided by the tool. Make sure hidden electrical wiring, water
pipes, and mechanical hazards are not in the blade path when cutting into a
wall.
8.4 Grip position adjustment (Fig 3)
Push the button backward as the direction of arrow shows on the Fig. 3 and rotate grip to left
or right at the same time.
There are five positions in all.
8.5 General cutting
Clamp your work piece if it is portable. Rest the front shoe of the saw on your work piece (be
sure the blade is not contacting the work piece) and start the saw, exerting enough pressure in
the direction of the cut to keep the shoe pressed firmly against the work piece at all times. Do
not force the cut or stall the saw. Don’t bend or twist the blade, let the tool and the blade do
the work.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX0396 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX0396 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX0396

Powerplus POWX0396 Gebruiksaanwijzing - Nederlands - 9 pagina's

Powerplus POWX0396 Gebruiksaanwijzing - Deutsch - 9 pagina's

Powerplus POWX0396 Gebruiksaanwijzing - Français - 9 pagina's

Powerplus POWX0396 Aanvulling / aanpassing - Alle talen - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info