POWE80041 EN
Copyright © 2021 VARO P a g e | 7 www.varo.com
9.4 Cooling down
The nozzle become very hot during use. Let them cool down before attempting to move or
store the tool.
Place this hot air gun vertically during cooling time or rest after operation.
▪ To reduce the cooling time, switch the tool on at the lowest air temperature setting and let
in run for a few minutes.
▪ Switch the tool off and let it cool down for at least 30 minutes.
10 MAINTENANCE AND CLEANING
Attention !Before performing any work on the equipment, pull the power
plug.
10.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2 Lubrication
Your power tool requires no additional lubrication