675235
11
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
POWE30040 EN
Copyright © 2017 VARO P a g e | 11 www.varo.com
13 CUTTING PARTICULARLY TOUGH OR ABRASIVE MATERIALS
Learn to use the tool by cutting wood before attempting to cut anything tougher. When cutting
tougher material, such as metals, more force is required to hold the work piece and clamping
may be required.
Never cut materials that produce toxic dust or fumes such as PTFE or asbestos.
13.1 Sheet metal:
Always set the depth adjustment to at least 1 mm deeper than the material thickness to
avoid the blade riding up over the surface. Scrap material is required underneath the work
surface.
Remove burrs and rust as these impede the feed across the material.
Thick beeswax (furniture polish) applied to the base plate of the tool makes metal cutting
easier.
Only suitable for cutting brass, copper, lead, aluminium or galvanised mild steel.
Every 2 minutes of metal cutting should be followed by a rest of at least 3 minutes.
13.2 Ceramic tiles, slates etc.:
Only use a blade specifically designed for this purpose.
Always use with a suitable vacuum cleaner or dust extractor connected as the dust can be
hazardous to the operator and prevent the guard operating correctly.
13.3 Plasterboard:
The plunge saw is only recommended for making occasional cut outs in plasterboard and
always us it with a suitable vacuum cleaner or dust extractor connected. The dust can
prevent the guard operating correctly.
Conventional tools such as keyhole saws or knives generally give excellent results, though
the plunge saw can be used if a particularly neat, dust free cut is required or if there is a
danger of cutting pipes or cables.
14 CLEANING AND MAINTENANCE
Regular cleaning is required for the safe operation of the tool, as an excessive build-up of dust
will prevent the tool from operating correctly.
The dust extraction hose may block and require cleaning occasionally, especially if damp
wood is being cut.
Unplug from mains supply.
Clean thoroughly with a small soft brush, like a paint brush.
Keep the cooling vents on the motor housing clean and unobstructed at all times.
Never use any caustic agents or solvents to clean the plastic parts.
14.1 Blades
Always use a sharp blade.
If the tool does not cut as well as expected or if it overheats (temperature cut out may trip)
the most common cause is a blunt blade.
It is difficult to see or feel if the blade is blunt. When in doubt use a new blade.
Blades are consumable items.
Beware when changing blades as they can become hot during use. Allow the blade some
time to cool before replacing it.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWE30040 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWE30040 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWE30040

Powerplus POWE30040 Gebruiksaanwijzing - Nederlands - 15 pagina's

Powerplus POWE30040 Gebruiksaanwijzing - Deutsch - 15 pagina's

Powerplus POWE30040 Gebruiksaanwijzing - Français - 16 pagina's

Powerplus POWE30040 Aanvulling / aanpassing - Alle talen - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info