POWDPG7575 EN
Copyright © 2020 VARO P a g e | 16 www.varo.com
▪ Check the chain tension every time you refill with saw chain oil. NOTE! A new chain has a
running-in period during which you should check the tension more frequently. Tension the
chain as tightly as possible, but not so tight that you cannot pull it round freely by hand
▪ Release the chain cover lock knob until it snaps open.
▪ Turn the knob anti clockwise to loosen the drive sprocket cover.
▪ Adjust the tension on the chain by turning the chain tensioner wheel down (+) for tighter
tension and up (-) to loosen the tension.
▪ Tighten the chain cover by turning the knob clockwise.
▪ Withdraw the knob back in to lock the tensioning.
Warning: never have more than 3 links removed from a loop of chain. This
could cause damage to the sprocket.
Chain lubrication:
Always make sure the automatic oiler system is working properly. Keep the oil tank filled with
good quality chain, bar and chain oil.
Adequate lubrication of the bar and chain during cutting operations is essential to minimize
friction with the guide bar.
Never starve the bar and chain of lubricating oil. Running the saw dry or with too little oil will
decrease cutting efficiency, shorten saw chain life, cause rapid dulling of chain, and lead to
excessive wear of bar from overheating. Too little oil is evidenced by smoke or bar discoloration.
15 TECHNICAL DATA
17 WARRANTY
▪ This product is warranted for a 36-month period effective from the date of purchase by the
first user.
▪ This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
