POWDPG7556 EN
Copyright © 2020 VARO P a g e | 11 www.varo.com
▪ Press and hold the start button (1). Pull the bail (11) toward the handle and release the
button to start the mower.
▪ To stop the mower, release the bail (11).
10.2 Setting blade height (Fig. 9)
When shipped, the wheels on the mower are set to a low-cutting position. Before using the
mower for the first time, raise the cutting position to the height best suited for your lawn.
10.3 To adjust the blade height:
▪ Remove key and battery pack.
▪ To raise the blade height, grasp the height adjustment lever (6) and move it toward the
front of the mower.
▪ To lower the blade height, grasp the height adjustment lever (6) and move it toward the
back of the mower.
▪ Reinstall key (2) and battery pack when you are ready to mow.
10.4 Gras box warning system
There is a warning piece in the grass catcher which will indicate the grass volume.
▪ If the flap is open it means that there is still space for grass collection.
▪ If the flap is closed it means that there is no space for grass collection.
11 CLEANING AND MAINTENANCE
11.1 Cleaning
▪ Keep all safety devices, air vents and the motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean cloth or blow it with compressed air at low
pressure.
▪ We recommend that you clean the device immediately each time you have finished using
it.
▪ Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the plastic parts of the equipment. Ensure that no
water can seep into the device.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11.2 Blade maintenance
▪ Regularly remove grass and dirt from the blade.
▪ At the beginning of the gardening season, carefully examine the condition of the blade.
▪ If the blade is very blunt, sharpen or replace the blade.
▪ If the blade is damaged or worn, fit a new blade.
If the blade is slipping, put the screwdriver into the location hole, tighten the blade by wrench.
Warning! Observe the following precautions:
▪ Be careful not to cut yourself. Use heavy-duty gloves or a cloth to grip the blade.
▪ Only use the specified replacement blade.
▪ Do not remove the impeller for any reason.
11.3 Replacing the blade
For safety reasons, we recommend having the blade replaced by an authorized professional.
Important: Wear work gloves!