POWDP15680 EN
Copyright © 2022 VARO P a g e | 11 www.varo.com
10.2 Drilling operation
For drilling in wood, metal or plastic materials, depress the release button (14) and rotate the
mode selector switch (4) so that the pointer points to the symbol “ ”.
10.3 Hammer drilling operation
For drilling in concrete, masonry, etc., depress the release button (14) and rotate the mode
selector switch (4) so that the pointer points to the symbol “ .”.
Position the bit at the desired location for the hole, then pull the switch trigger (5). Do not force
the tool. Light pressure gives best results. Keep the tool in position and prevent it from slipping
away from the hole.
Do not apply more pressure when the hole becomes clogged with chips or particles. Instead,
run the tool at an idle, then remove the bit partially from the hole. By repeating this several
times, the hole will be cleaned out and normal drilling may be resumed.
10.4 Chiseling operation
For light chipping, chiseling and demolition applications, depress the release button (14) and
rotate the mode selector switch (4) so that the pointer points to the symbol “ .”.
Use the position of flat chisel
Depress the release button (14) and rotate the mode selector switch (4) so that the pointer
points to the symbol “ .”, flat chisel position can be adjusted to facilitate the chisel cut
jobs.
10.4.1 Switch lock (Fig. 11)
The switch trigger can be locked if push the forward / reverse switch to the centre position.
This helps to reduce the possibility of accidental starting when not in use. To lock the switch
trigger, place the direction of rotation selector in the centre position.
10.4.2 Direction of rotation (Fig. 12)
Direction of rotation is controlled by the direction of rotation selector located above the switch
trigger.
10.4.2.1 Clockwise rotation:
Right: To select forward rotation, release the on/off switch and push the forward/reverse
switch to the left side of the tool.
10.4.2.2 Anticlockwise rotation:
Left: To select reverse rotation, push the switch to the right side of the tool.
