676276
5
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
POWAIR0805 EN
Copyright © 2014 VARO P a g e | 5 www.varo.com
It must be checked that the maximum operating speed of the machine tool is higher
than the nominal speed of the machine.
It must be checked that the hook&loop abrasive sheets can be affixed concentrically
to the mounting plate.
4.7 Hazards in the work environment
Slipping, tripping and falling are the main causes of injuries at the workplace. Keep in
mind that surfaces may have become slippery during machine use, and remember
tripping hazards caused by the air or hydraulic hose.
Proceed with caution in unfamiliar surroundings. There may be hidden dangers due
to electrical cables or other supply lines.
This machine for grinding and sawing is not suitable for use in explosive
environments and is not insulated against contact with electrical power sources.
Therefore, it may not come into contact with electrical power sources!
Verify that there are no electrical lines, gas lines, etc. that may result in a hazard in
the event of them becoming damaged during machine use.
5 ADDITIONAL SAFETY INSTRUCTIONS FOR PNEUMATIC MACHINERY
Compressed air can result in serious injuries.
Always close the air supply, release pressure from the hose, and disconnect the
machine from the compressed air supply, when the machine is not in use, before
switching accessories or when performing repairs.
Never aim the air flow at yourself or others.
Hoses flapping about can result in serious injuries. Therefore always inspect hoses
and their fasteners for damage and a secure fit.
If using universal swivel couplings (coupling discs) always use locking pins and use
whip-check hose safety cables for protection in the event the connection between the
hose and the machine or in between hoses fails.
Ensure not to exceed the maximum pressure specified on the machine.
Never carry pneumatic tools by the hose.
6 AIR SUPPLY
Ensure air valve (or trigger) is in the “off” position before connecting to the air supply.
Item will require air pressure of 90psi, and air flow according to specification.
Drain the air tank daily.
Clean air inlet filter weekly.
Line pressure should be increased to compensate for unusually long air hoses (over
8 meters). The hose diameter should be 3/8 I.D.
Keep hose away from heat, oil and sharp edges. Check hose for wear, and make
certain that all connections are secure.
7 LUBRICATION
An automatic in-line filter-regulator-lubricator is recommended (Fig 1) as it increases tool
life and keeps the tool in sustained operation. The in-line lubricator should be regularly
checked and filled with air tool oil.
Proper adjustment of the in-line lubricator is performed by placing a sheet of paper next to
the exhaust ports and holding the throttle open approximately 30 seconds. The lubricator
is properly set when a light stain of oil collects on the paper. Excessive amounts of oil
should be avoided.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWAIR0805 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWAIR0805 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWAIR0805

Powerplus POWAIR0805 Gebruiksaanwijzing - Nederlands - 11 pagina's

Powerplus POWAIR0805 Gebruiksaanwijzing - Deutsch - 12 pagina's

Powerplus POWAIR0805 Gebruiksaanwijzing - Français - 11 pagina's

Powerplus POWAIR0805 Aanvulling / aanpassing - Alle talen - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info