POWAIR0114 EN
Copyright © 2019 VARO P a g e | 3 www.varo.com
▪ Never use oxygen, combustible or any other bottle gas as a power source or would
cause explosion and serious personal injury (see fig 2).
▪ Fluid and solvent can be highly flammable or combustible. Pls Use the tool only in well-
ventilated area, and avoid any ignition sources, such as smoking, open flames and
decrial hazard (see fig 3).
▪ Disconnect tool from air supply hose before doing tool maintenance and during non-
operation, for emerge stop and prevention of unintended operation, a ball valve near
the gun to air supply is recommend.
▪ Use clean, dry and regulate compressed air rated at …bar, never exceed maximum
permissive operating pressure …bar.
▪ Never use homogenate hydrocarbon solvent, which can chemically react with
aluminum and zinc parts and chemically compatible with Alum. and zinc parts.
▪ Never point gun at you and others at any time.
▪ Before operating the tool, make sure all the screws & caps are securely tightened in
case of leaking.
▪ Never modify this tool for any other applications. Only use parts, nozzles and
accessories recommended and accessories recommended by manufactures.
5 INSTRUCTIONS FOR OPERATION
▪ Check if the air washing un is in good condition before you start working.
▪ Fill the cup with washing liquid.
▪ Assemble the cup with the gun.
▪ Connect the air compressor with the air inlet connection of the air washing gun.
▪ Press the trigger to the end to make the washing well.
After finish working, make sure to close air compressed source!
6 MAINTENANCE
Incomplete cleaning could cause function failures and a degradation of the
spray pattern.
▪ Remove the remaining liquid from the cup.
▪ Disassemble the air washing gun and clean all parts.
▪ Re – assemble the air washing gun again.
Warning: Never use metal or other objects that could damage the holes in
the nozzle and cap. Never immerse the spray gun completely in solvent.
never use components or parts that are not manufacturer originals.
