▪ For toxic vapors produced by spraying certain materials can create intoxication and
serious damage to health. Always wear safety glasses, gloves and respirator to
prevent the toxic vapor hazard, solvent and pointing paint coming into contact your
eyes or skin. (see fig 1)
▪ Never use oxygen, combustible or any other bottle gas as a power source or would
cause explosion and serious personal injury. (see fig 2)
▪ Fluid and solvent can be highly flammable or combustible. Pls Use the tool only in
well-ventilated area, and avoid any ignition sources, such as smoking, open flames
and decrial hazard. (see fig 3)
▪ Disconnect tool from air supply hose before doing tool maintenance and during non-
operation, for emerge stop and prevention of unintended operation, a ball valve near
the gun to air supply is recommend.
▪ Use clean, dry and regulate compressed air rated at 3.0-4.0bar, never exceed
maximum permissive operating pressure 8.3bar (120psi) (see fig 4)
▪ Never use homogenate hydrocarbon solvent, which can chemically react with
aluminum and zinc parts and chemically compatible with Alum. and zinc parts.
▪ Never point gun at you and others at any time.
▪ Before operating the tool, make sure all the screws & caps are securely tightened in
case of leaking;
▪ Before painting, make inspection for free movement of trigger and nozzle to insure
tool can operate well.
▪ Never modify this tool for any other applications. Only use parts, nozzles and
accessories recommended and accessories recommended by manufactures.