480881
9
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
POW60476 EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
9.8.1 Cutting string extension
Your unit is equipped with an automatic tapping dual string mechanism, i.e. both strings will
become extended when you tap the ground with the cutting attachment. If the strings are
initially longer than the given cutting diameter, the line cutting blade will automatically adjust
their length. Attention! Regularly remove dirt from the line cutting blade. Otherwise, its cutting
effect will be limited.
In case of a decreasing cutting performance:
Start the engine and hold the unit above grass. Hit the ground with the cutting attachment. The
string will extend itself automatically.
In case it becomes impossible to extend the string:
Turn the unit off
Properly insert the spindle and strongly pull the string end.
In case you do not see the string tips:
Change the string spindle.
9.9 Work with the metal cutting blade
Attention! During your work always wear the belt and suitable work clothes. Make sure the
cutting blade is properly mounted. Damaged and blunted unit components must be replaced.
There is a risk of injury.
Use the cutting blade on free and flat surfaces. Carefully check all the areas to be treated
and remove all the foreign objects. Avoid any contact with stones, metal or other
obstacles. The metal cutting disk could become damaged and there is also a risk of
kicking.
During your work, hold the cutting attachment close above the ground and move the unit
like a regular scythe from side to side.
Do not hold the cutting attachment under any angle and do not lift it above the ground.
Do not use the unit for the cutting of shrubs, brushwood or underwood.
Regularly check the metal cutting blade's condition and change damaged cutting blades.
10 CLEANING AND MAINTENANCE
ATTENTION! Let any repair and maintenance work not described in these
instructions be carried out by a professional service shop. Only use
original replacement parts. Any maintenance and cleaning tasks should
only be carried out when the motor is switched off and the ignition
disconnected. Risk of injury! Let the machine cool down before undertaking
any maintenance or cleaning tasks. Parts of the motor are hot. There is a
risk of getting burned!
This tool corresponds to the relevant safety provisions.
Repairs, service and maintenance must be carried out exclusively by authorized service
workshops/trained professionals.
Only original spare parts may be used for repairs; otherwise there is a risk of injury for the
operator.
10.1 Unit cleaning
Subject your unit to regular cleaning and care. It will deliver good performance for a very long
time.
After every operation clean the cutting attachment of grass and soil.
Clean the unit with a soft brush or a rug.
The unit must not be sprayed with water or submerged into water.
Do not use any detergents or cleaning solutions. The unit could be damaged. Chemical
substances could negatively affect the unit's plastic components.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Powerplus-POW60476

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POW60476 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POW60476 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POW60476

Powerplus POW60476 Gebruiksaanwijzing - Nederlands - 15 pagina's

Powerplus POW60476 Gebruiksaanwijzing - Deutsch - 15 pagina's

Powerplus POW60476 Gebruiksaanwijzing - Français - 15 pagina's

Powerplus POW60476 Aanvulling / aanpassing - Alle talen - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info