582171
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
POW5100 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
It is compulsory to wear certified gloves and protective goggles when using the device.
Never use the machine without its protective guard and “spark guards”.
Always check that the work supports are firmly fixed before using the machine.
As the wheel wears down, adjust the work support and screen slide:
1.5mm between the work support and the wheel
2mm between the slide and the wheel
When using the grinder, stand in a stable, balanced position, without stretching, and keep
children at a distance.
Never leave the machine running unsupervised. Keep the workshop clean and tidy.
Before use, make sure the grinding wheels are not damaged or cracked. If there is the
slightest doubt, replace at once (a damaged grinding wheel can fly apart at speed).
Replacement grinding wheels must be identical in characteristics and dimensions.
This machine is not suitable for grinding soft substances such as lead, magnesium or light
alloys.
7 ASSEMBLY
ATTENTION! Disconnect the power plug before carrying out any
adjustments or maintenance.
Fit the work supports (10) using the bolts supplied. Set these work supports not more than
2mm from the grinding wheel.
Fit the transparent protection screens (6), (7) using the screws supplied, over the wheel
guards. The clearance between the slide (7) and the wheel must not exceed 2mm.
Whenever the machine is used, the screen must be in low position.
It is strongly recommended that the grinder should be bolted to a bench or work table. The
length of the bolts will be determined by the thickness off the bench top. The machine
must be fixed by 4 bolts in the places provided for them in the base (1). The grinder is
fitted with rubber “anti-vibration” shoes. Nevertheless, the inclusion of a piece of soft wood
between the base and the bench is recommended for better absorption of vibrations.
8 OPERATION
This machine is designed for sharpening tools or grinding small parts. It is not suitable for
grinding heavy sheet metal parts.
Use the appropriate grinding wheel for the job: the “SOFT” wheel for hard metals / the
“HARD” wheel for soft metals.
Do not grind wood, plastic, soft alloys (e.g. lead) or similar materials, as this would clog
the grinding wheels.
Apply gradually increasing pressure to the part to be ground, which must not be brought
into sudden contact with the grinding wheel.
For prolonged grinding operations, cool the work at regular intervals in water. Some tools
(e.g. wood chisels) must not be ground “blue”.
Hold the work-piece firmly so that it cannot jam between the grinding wheel and the
support (with risk of damage or even fracture of the wheel).
Changing the grinding wheel (tools required: wrench 19mm wrench 8mm cross-head
screwdriver): Machine disconnected
remove the spark-guard (6) or (7) and wheel guard (5) or (9),
unscrew wheel fixing nut
Warning: seen from in front, the shaft on the right has a right-hand
(conventional) thread, and the shaft on the left a left-hand thread.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POW5100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POW5100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POW5100

Powerplus POW5100 Gebruiksaanwijzing - Nederlands - 8 pagina's

Powerplus POW5100 Gebruiksaanwijzing - Deutsch - 8 pagina's

Powerplus POW5100 Gebruiksaanwijzing - Français - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info