480986
6
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
POW462 EN
Copyright © 2015 VARO P a g e | 6 www.varo.com
Remark: always make sure you connect the earth clamp to proper earth. In case you
don’t, severe damage may occur to main grounding or machine itself (melting of ground
wire).
Mains socket must be secured with proper (automatic) fuses. (According to section of
wire, a standard socket with earth should have a 16A fuse) Using higher fuses may result
in burning of the wires and result in fire in the building.
6.2 Small and moist rooms.
When you use your welder in small or moist rooms you have to use extra insulation layers,
use high quality insulating gloves, leather or other very bad conducting material, to protect
your body. In extreme situation the output voltage may not be higher than 48V.
6.3 Protective gear
While performing work, the entire body of the welder must be protected with clothing and
facial protection gear against radiation (burns).
Welding gloves made of a suitable material (leather) must be worn on both hands. These
must be in perfect condition.
In order to protect clothing/skin from flying sparks and burns, appropriate aprons must be
worn. If the nature of the work, e.g. overhand welding, requires it, a protective suit as well
as a safety helmet must be worn.
6.4 Protection against radiation and burns through :
signs placed in the workplace warning about danger to eyes: a sign reading “Caution, do
not look into flames!” The workplace must be closed off as completely as possible so that
people in the vicinity are sufficiently protected. Unauthorized people must be kept away
from the welding area.
the walls in the immediate vicinity of permanent welding areas should not have a light
colour or glossy finish, windows must be treated up to at least eye-level to protect against
light transfer or reflection, e.g. by applying a suitable layer of paint.
7 OPERATION
7.1 Preparation.
The earth clamp (2) must be connected to the work piece or to the ground the work piece is
standing on.
Caution :
make sure there is direct contact with the work piece. Avoid painted or insulated surfaces.
The welding cable is provided with a special clamp to hold the electrode.
Always wear the protective cap, it protects you and allows looking at the weld.
7.2 Welding.
After making all proper connections you can proceed as follows:
put the bare end of the welding electrode in the clamp (1) and connect the earth clamp (2)
to the work piece.
Switch the welder on (4) and choose the welding current by turning the hand wheel (3),
depending on electrode Ø you will use.
Hold the protective cap before your face and wrap the electrode over the work piece, like
lighting a match. This is the best way to light the bow. Test on a trial piece first to check
wither you have selected proper electrode/current.
Electrode Ø (mm)
Welding current. (A)
2.5
70 100
3.2
100 130
4.0
130 - 160
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POW462 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POW462 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POW462

Powerplus POW462 Gebruiksaanwijzing - Nederlands - 10 pagina's

Powerplus POW462 Gebruiksaanwijzing - Deutsch - 11 pagina's

Powerplus POW462 Gebruiksaanwijzing - Français - 11 pagina's

Powerplus POW462 Aanvulling / aanpassing - Alle talen - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info