582134
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
POW30625 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
Do not burn the battery.
Never attempt to open the battery.
In case of skin contact of the battery fluid (a solution of 25-30% potassium hydroxide),
flush immediately with abundant water. Neutralize with a mild acid such as lemon juice or
vinegar. In case of eye contact, rinse abundantly for 10 minutes with clean water and
consult a physician.
8 OPERATION
8.1 Charging the battery (fig. B)
The battery (6) must be charged before first use. Only after several charge and discharge
cycles the battery will attain full capacity.
Remove the battery from the machine.
Connect the battery to the charger.
Insert the mains adaptor of the charger into a mains outlet. Red LED lights. The green
charging indicator lights when the battery is charging. Never charge the battery for more
than 5 hours. If the battery is fully charged, the green charging indicator will go out.
8.2 Positioning and removing a drill or screw bit
This tool is equipped with a keyless chuck.
Open the chuck by turning the collar.
Insert the drill or screw bit in the chuck.
Close the chuck by firmly tightening the collar while holding the rear part of the chuck with
the other hand.
In order to remove the drill or screw bit proceed in reverse order. Before positioning or
removing a drill or screw bit always remove the battery from the machine.
8.3 Forward/reverse switch (fig. A)
Push the forward/reverse switch (2) from right to left side to drill holes and fasten screws.
Push the forward/reverse switch (2) from left to right side to loosen screws. Always wait
until the motor has come to a complete standstill before changing the direction of rotation.
8.4 Adjusting the torque (fig. C)
This machine has been fitted with an adjustable coupling (20+1 pos) to limit the torque when
tightening screws .
Turn the adjustment collar (3) clockwise to reduce the torque and counterclockwise to
increase the torque. The correct setting depends on the type and size of the screw and the
work piece.
In case of doubt, start with the lowest setting and increase the torque until you have
reached the desired result.
For drilling, turn the adjustment collar fully counterclockwise (to the drilling symbol).
8.5 Switching on and off (fig. A)
To switch on the machine, press the on/off switch (1).
To switch off the machine, release the on/off switch.
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POW30625 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POW30625 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POW30625

Powerplus POW30625 Gebruiksaanwijzing - Nederlands - 9 pagina's

Powerplus POW30625 Gebruiksaanwijzing - Deutsch - 9 pagina's

Powerplus POW30625 Gebruiksaanwijzing - Français - 9 pagina's

Powerplus POW30625 Aanvulling / aanpassing - Alle talen - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info