480985
8
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
POW302 EN
Copyright © 2015 VARO P a g e | 8 www.varo.com
8.6 Rpms, feed rate
The drill feed is done manually with the 3-armed drill lever. The rotational speed is defined of
rotation is determined by the number of revolutions of the drill spindle and by the drill diameter.
The correct choice of feed rate and rotational speed of the drill spindle are deciding factors for
the drill’s lifespan. As a basic rule, the drill speed must be adjusted downward with increase
the drill diameter. The greater the firmness of the workpiece, the more cutting pressure must
be applied. To avoid overheating the drill as the cutting pressure is increased, the feed rate
and rotational speed must also be reduced. The drill must be also be cooled with drill oil.
For thin plates, quite large drillings must be done carefully at a low feed rate and little cutting
pressure, to ensure a precise cut and correct hole size. For deep drilling (greater than 2 x the
drill diameter) chip removal is more difficult and the drill temperature is higher.
Therefore lower the feed rate and rpm and withdraw the drill regularly for better chip removal.
For drilling at a diameter greater than 8 mm, pre-drilling is essential to avoid early wear of the
drill, i.e., its main cutting edge, and excessive load on the drill tip.
9 CLEANING AND MAINTENANCE
Attention! Pull the power plug before doing work of whatever kind on the
equipment, pull the power plug.
9.1 Cleaning
Keep the tool’s ventilation slots clean to prevent the motor from overheating.
Regularly clean the tool’s housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9.2 Lubrication.
The tool requires no lubrication. All bearings and drive gears are maintenance-free and
greased for the lifetime of the tool.
The drill must be cleaned with compressed air or a dry cloth. It is advisable to clean the blank
parts from time to time with environmentally friendly solvents and to only grease with acid-free
oil or grease.
10 TECHNICAL DATA
230V
50Hz
350W
I
Ordinary
Ø 13mm
580 min
-1
850 min
-1
1220 min
-1
1650 min
-1
2650 min
-1
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POW302 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POW302 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POW302

Powerplus POW302 Gebruiksaanwijzing - Nederlands - 11 pagina's

Powerplus POW302 Gebruiksaanwijzing - Deutsch - 12 pagina's

Powerplus POW302 Gebruiksaanwijzing - Français - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info