628483
37
Verklein
Vergroot
Pagina terug
1/85
Pagina verder
This command sets the gain of the output to the phone interface. This command is an alias for the
GAINOT. It is provided for backwards compatibility with and ease of migration from the EF200. When
possible, the
GAINOT command should be used instead of this command.
This command is an integer command. See
Section 6.2 for more information on this type of command.
The minimum and maximum values for this command are -100 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
T01GAINP6
Set phone output gain to 6 dB.
T01GAINP6
T01GAINP>3
Increase phone output gain by 3 dB.
T01GAINPx, where x is the new value of the
phone output gain. If this command was issued
after the example above, then the status message
would be T01GAINP9.
T01GAINP?
Query phone output gain.
T01GAINPx, where x is the new value of the
phone output gain. If this command was issued
after the example above, then the status message
would be T01GAINP9.
8.35. GAINSIT -- Set From Phone User Tone Gain
This command sets the gain of the user tones coming from the phone DSP. User tones include entry
and exit tones (see
TONEE) and custom tones (see the SOUNDP and SOUNDL commands). In most
cases, the tones are played out "locally" and their gains are adjusted by the GAINSIT command.
Sometimes, the tones are played out to the phone, and the gain is adjusted by the
GAINSOT
command.
This command is an integer command. See
Section 6.2 for more information on this type of command.
The minimum and maximum values for this command are -20 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
T01GAINSIT6
Set tone output gain to 6 dB.
T01GAINSIT6
T01GAINSIT>3
Increase tone output gain by 3 dB.
T01GAINSITx where x is the new value of the
tone output gain. If this command was issued
after the example above, then the status
message would be T01GAINSIT9.
T01GAINSIT?
Query tone output gain.
T01GAINSITx, where x is the new value of the
tone output gain. If this command was issued
after the example above, then the status
message would be T01GAINSIT9.
37

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Polycom Vortex EF2201 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Polycom Vortex EF2201 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Polycom Vortex EF2201

Polycom Vortex EF2201 Gebruiksaanwijzing - English - 43 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info