628483
34
Verklein
Vergroot
Pagina terug
1/85
Pagina verder
Example Description Status Message
T01GAINA6
Set phone input gain to 6 dB.
T01GAINA6
T01GAINA>3
Increase phone input gain by 3 dB.
T01GAINAx, where x is the new value of the
phone input gain. If this command was issued after
the example above, then the status message would
be T01GAINA9.
T01GAINA?
Query phone input gain.
T01GAINAx, where x is the new value of the
phone input gain. If this command was issued after
the example above, then the status message would
be T01GAINA9.
8.29. GAIND -- Set Gain of Incoming DTMF Tones
This command sets the gain of the incoming DTMF tones. The gain of the outgoing DTMF depends on
the country that the Vortex is configured for (see the
COUNTRY) command. This command is an alias
for the
GAINDIT command. It is provided for backwards compatibility with and ease of migration from
the EF200. When possible, the
GAINDIT command should be used instead of this command.
This command is an integer command. See
Section 6.2 for more information on this type of command.
The minimum and maximum values for this command are -20 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
T01GAIND6
Set incoming DTMF gain to 6 dB.
T01GAIND6
T01GAIND>3
Increase incoming DTMF gain by 3 dB.
T01GAINDx, where x is the new value of the
incoming DTMF gain. If this command was
issued after the example above, then the status
message would be T01GAIND9.
T01GAIND?
Query incoming DTMF gain.
T01GAINDx, where x is the new value of the
incoming DTMF gain. If this command was
issued after the example above, then the status
message would be T01GAIND9.
8.30. GAINDIT -- Set Gain of Incoming DTMF Tones
This command sets the gain of the incoming DTMF tones. The gain of the outgoing DTMF depends on
the country that the Vortex is configured for (see the
COUNTRY) command.
This command is an integer command. See
Section 6.2 for more information on this type of command.
The minimum and maximum values for this command are -20 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Polycom Vortex EF2201 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Polycom Vortex EF2201 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Polycom Vortex EF2201

Polycom Vortex EF2201 Gebruiksaanwijzing - English - 43 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info