648707
22
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
ENGLISH
| 40 |
27. TROUBLESHOOTING - TIPS
PROBLEM CAUSE SOLUTION
UNICO does not turn on. No power. Check the cable, plug and socket.
The motor revs/has little suction Tubes or accessories blocked Turn the appliance off, unplug, remove any
blockages in the tubes and accessories.
UNICO has no/reduced suction Dirt collector full or not correctly
inserted.
Suction adjustment set at the minimum
level.
Dirt collector or vacuum tube not
correctly inserted.
Clogged filters.
Clogged suction tubes.
Empty the dirt collector and insert correctly.
Adjust suction using the cursor on the handle.
Correctly insert the dirt collector tank and/or check
that the flexible vacuum tube has been correctly
inserted.
Proceed with filter cleaning as described in chapter 18.
Clean the tubes, as described in Chapter 22.
Water collects under the appliance during
vacuuming of liquids and/or damp dirt.
Liquid in dirt collector has exceeded the
MAX level.
Foam in the dirt collector.
Empty the dirt collector.
Follow the cleaning instructions in Chapters 17 - 18
- 22.
UNICO does not dispense steam. Boiler switched off.
Boiler out of water.
Steam hose not inserted.
Steam lock activated.
The boiler is not yet pressurised.
Turn on the boiler button.
Add water to the tank as described in Chapter 15.
Connect the steam hose to the flexible vacuum
tube, locking the automatic buttons; connect the
steam hose to the appliance and the handle (as
described in Chapter 1 and shown on page 2).
Deactivate the steam lock on the handle.
Wait for the steam indicator light to stop flashing.
The universal brush selector does not work. The holder with cloth for steam cleaning
is mounted on the brush.
Remove the holder with cloth from the brush.
In preset-program mode, at the end of suction,
there was no time to finish drying.
Vacuuming too slowly over the surfaces. In preset-program mode, it is still possible to
activate suction by pressing the suction button.
During cleaning operations, lines or traces of
dirt remain.
The Multibrush is dirty. Clean the Multibrush by washing it under running
water and wait for it to dry completely before using
it again.
Non-uniform drying of the hard floor. The rubber inserts are worn. Replace the inserts, as described in Chapter 23.
UNICO MCV80-MCV85 - M0S11431 - 1Q09:UNICO 30/08/2016 16.17 Pagina 40
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Polti Unico MCV80 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Polti Unico MCV80 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info