561266
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Attention: When not all placed plugs appear in the list, this can be due to one of the following reasons:
Not all plugs have been signed on or recognized by the network: -
If multiple networks are active in the immediate surroundings, the process to sign on the plugs may take a
little longer. After approximately 5 minutes all plugs should appear on screen.
One or more plugs are unreachable: -
When a plug is placed too far from the others it cannot communicate with the network. To solve this you can
place the plug closer to the others or place another plug in between the unreachable plug and the others.
Please make sure that the distance between the plugs is no more than 5 meters.
The plug does not work: -
If both abovementioned steps do not lead to a complete picture of your network in the screen of ‘Select
Modules’, you may reset the plug. For a complete explanation of this procedure we refer you to the Detailed
Manual to be accessed by clicking on the Question-mark Icon on the lower right side of the program.
The Wizard will guide you further through a number of screens to entering data in order to create a network.
Proceed with all the steps of the wizard and click on ‘complete’ . The system will be activated.
Save the installation list with the Licence Code.
Use software
Your Energy Management System is now installed! By using the software you can now measure and switch your appliances.
You can save on your energy-consumption by sending switching schedules to the plugs. As a service you may find hereunder
a software-window with instructions.
Technical information
The computer can be switched off whilst the system continues to operate. The plugs have their own memory so even when
the computer is not switched on the measured data are stored and the plugs will switch according to the switching schedules
you entered. As soon as the computer is switched on (with the Stick connected) the stored data are retrieved from the plugs
and the complete overview of the energy-consumption is realized.
In order for the software to communicate with the products the Stick should be kept connected to the computer. You may
disconnect the Stick however this leads to interrupted communication between the plugs and the computer which means
that the current usage is not displayed and new usage data are not claimed. The disconnection does not interrupt the
actions of the network or the data already stored in the software, like the switching schedules. As soon as the Stick in
connected to the computer again, the software program will have to be started again. The computer then retrieves all data
stored in the plugs and in case new switching schedules are entered, they will be activated.
Switching, program switching
schedules in order to save.
Overviews, look at reports and
graphs of the energy consumption,
the costs and the CO2-emission.
D
irect Switching, the
c
ted appliance or group
rectly switched on/off .
Usage data, preset the timeframe
for use. The graph is empty until
data have been received.
Settings, add plugs, create groups
and rooms.
t
ick, the Stick flashes
h
en data are retrieved
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Plugwise Home Basic bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Plugwise Home Basic in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info