637171
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
ODOBIKE
AVS
MAX
AVS
ODO
MAX
AVS MAX
ODO
R
T
M
D
S
T
CURRENT SPEED • Miles or Kilometers per hour • 0-99.9 mph/Kph • Increments of 0.1 mph/Kph
RIDE TIME, "RTM" • Up to 9:59:59 • Increments of 1 second
RIDE DISTANCE, "DST" • Up to 999.99 M or K • Increments of 0.01 M or K
ODOMETER, "ODO" • Up to 999.99 M or K • Increments of 0.01 M or K
(ODO= Cumulative distance for BIKE 1 and BIKE 2)
1. Parts List
MOUNTING BRACKET
LINE : LCD Specification : Line 1, 2 and 3 modes do not change
1
2
3
4
1
2
3
4
SCREEN:
MOUNTING SENSOR
1
MOUNTING MAGNET (Front Wheel)
2
3
2. Mounting Instructions
3. Functions & Specifications
OR
OR
OR
AVERAGE SPEED, "AVS" • 0-99.9 mph/Kph • Increments of 0.1 mph/Kph
MAXIMUM SPEED, "MAX" • 0-99.9 mph/Kph • Increments of 0.1 mph/Kph
TEMPERATURE • -19˚ to 120˚F/ -19˚ to 50˚C
CLOCK • 12 Hr format • Indicated by flashing colon ":"
BIKE ODOMETER, "BIKE ODO" • Up to 99,999 M or K • Increments of 0.1 M or K
This is the distance for the wheel size currently being used, it only appears when distance is registered
on both BIKE 1 and BIKE 2.
PUSH AND RELEASE FOR
MODE
CHANGE
CAUTION:
HOLD FOR
LESS THAN ONE SECOND
OR YOU WILL RESET ALL
OF THE RIDE DATA
SEE TOP OF
NEXT PAGE.
Thank you for purchasing the Planet Bike Aero Wireless
bicycle computer. Planet Bike will donate 25% of our
profits from this purchase and any other Planet Bike
products you buy to grassroots bicycle advocacy groups
that work to improve conditions for cyclists. Enjoy your
Aero Wireless bicycle
computer and thank
you for making a
difference!
COMPUTER HEAD REMOVAL
STEP 1: Thread the quick ties through the slots in the wheel sensor and attach to the
right or left fork arm so that it is on the same side as the mounting bracket, making
sure that the battery cover is facing the wheel (diagram #1).
STEP 2: Attach magnet to spoke using a screwdriver (diagram #2) so that the
magnet lines up with the top or bottom glossy line on the wheel sensor. Do not
over-tighten magnet screw.
STEP 3: Unthread sensor knob until sensor can swivel freely and rotate the sensor until
it is within 2mm of the magnet (diagram 3). Tighten the knob to fix sensor position.
STEP 4: Attach the computer bracket to the handlebars near the stem (diagram #4).
For 31.8 handlebars, no rubber shim is needed. For smaller diameter handlebars, use the
large shim to achieve a snug fit. Tighten the screw so the bracket will not rotate on
the handlebars. Slide the computer head into the bracket until the latch "snaps" into
place.
STEP 5: Test for proper alignment of the magnet and sensor. First, push the large
mode button located below the screen to activate. Now, spin the front wheel. Speed will
begin to register if the magnet and sensor are properly aligned.
TO REMOVE COMPUTER FROM BRACKET: Push down the bracket latch and
slide the computer forwards off of the bracket (diagram #5).
1. 31.8 mm Mounting Bracket 3. Computer Case
2. Wheel Sensor
5. Wheel Magnet
7. Quick Ties6. Rubber Shims
Line up Sensor
and Magnet at
same level
* Less than
2 mm apart
* DO NOT line
up Magnet
between
GLOSSY LINES
on Sensor.
TURN KNOB
COUNTER
CLOCKWISE
TO ADJUST ANGLE
ODO
AVS
MAX
BIKE
BIKE
BIKE
4. Battery
W I R E L E S S
CHANGE MODE TO SCREEN 2-4 BY PUSHING MODE BUTTON TO ACCESS:
4
Front
of bike
Rear
of bike
5
Front
of bike
Rear
of bike
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Planetbike Aero wireless bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Planetbike Aero wireless in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info