668002
9
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
9
Product Function
Trigger Sync Mode
Coding...
mast er
remove it.
control each other. When group setting is enabled, LCD screen will show the corresponding group. Turn it off to
2
After coding succeeded, the brightness of the same groups of the corresponding LED lights can freely adjust and
of Group B. Adjustment can be made as long as the group that already opened is the same as any of the group.
Group A. When BC on the same group, if need to adjust the brightness of the lights, subject to the brightness
3
When ABC, AB on the same group, if need to adjust the brightness of the lights, subject to the brightness of
Sonnon DL-914 is equipped with wired or wireless triggering
Wired Triggering
trigger, just coding without connecting them via cables one by one.
sets witch opened, LED light will be off, at this time, it will enter to trigger status). If multi lights are needed to
then connect 3.5 port to LED light. When triggering, turn on the LED trigger set switch to trigger (when trigger
with PC trigger port (If not, you may purchase the power adapter with PC port), connect PC port to camera, and
When using wired triggering, you only need one Pixel PC-3.5 connecting cable. But your camera must be equipped
Wireless Triggering
the LED lights that will be joined. After coding succeeded, you may use it.
required to purchase separately. When using with King Pro for wireless triggering, please be sure to coding all
When using wireless triggering, it needs to work with Pixel King Pro transmitter. Pixel King Pro transmitter is
not be available, and it will enter to trigger status.
coding.When triggering, you need to turn on the trigger set sync switch of the LED light. Now, the LED light will
the LCD screen of the LED light will be back to the current status. Then restart King Pro transmitter to complete
time, at this time, King Pro LCD screen will show Coding it means coding is in progress. After coding succeeded,
the LCD screen. And then press the button C on the King PRO transmitter and turn on the power at the same
LED light and turn on the power at the same time. Release the sync switch until BIND RX will be displayed on
1
When using King Pro transmitter for triggering, the coding steps as: press and hold Group B sync switch of the
O
FF
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pixel DL-914 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pixel DL-914 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info