455263
40
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
Additional information
11
40
En
No sound from subwoofer. • The subwoofer is disconnected or switched
off.
• Connect or switch on the subwoofer (see page 13).
• The subwoofer's settings are incorrect. • Set the subwoofer (see page 31).
• Set the front speakers to Small (
S
) (see page 31).
• The subwoofer's levels are too low. • See on page 33 to check the speaker levels.
• The LFE Attenuator is set to
OFF
.• Set the LFE Attenuator to either
0 dB
or
10 dB
(see
page 32).
When a search is performed by a
DTS compatible CD player
during playback, noise is output.
• The search function performed by the player
slightly alters the digital information, making
it unreadable.
• This is not a malfunction, but be sure to turn the volume
down to prevent the output of loud noise from your
speakers.
The Dolby/DTS indicator doesn't
light when playing Dolby/DTS
software.
• The player is paused. • Press play.
• The player's sound output settings are
wrong.
• Set the player correctly (consult the manual that came
with the player, if necessary).
When playing a 96 kHz/24bit disc
the sound is too loud.
• Different discs have different recording
levels so some may be louder than others.
• Turn the volume down.
The sound distorts. • The analog signal is too strong. • Turn on input attenuator (see page 32).
• Master volume is too loud. • Turn the volume down.
You can only hear treble from
speakers.
• The front speakers are set to small (
S
). • Set the front speakers to large (
L
) (see page 31).
Sound is produced from analog
components, but not from digital
ones (DVD, LD, CD-ROM etc.).
• Digital connections are incorrect. • Make digital connections (see page 8)
• The digital output of the player is turned off. • Turn on the digital output of the player on (consult the
manual that came with the player, if necessary).
• The CD-ROM player is outputting a data
stream (not an audio signal) which is
incompatible with this receiver.
• Use a player that is compatible with this receiver.
• Digital connections are incorrect. • Make digital connections (see page 8).
• Analog input has been selected. • Select digital input (see page 29).
• The digital input assignment is wrong. • Assign the digital input (see page 32).
No sound is output or a noise is
output when Dolby Digital/DTS
software is played back.
• A DVD player not compatible with Dolby
Digital/DTS is being used.
• Make sure your DVD player is compatible with Dolby
Digital/DTS.
• The settings on the DVD player are incorrect
and/or the DTS signal output is turned off.
• Make sure the player's settings are correct and/or the
DTS signal out is on. Refer to the instruction manual
supplied with the DVD player.
• The digital output level is turned down on a
CD player or other component equipped with
digital output level adjustment capability. (The
DTS signal has been altered by the player, and
cannot be read.)
• Set the digital volume level of the player to full, or to the
neutral position.
The settings have all been
cleared.
• The receiver has been unplugged or the
main power turned off for more than a month.
• Set the receiver again (see page 31).
No image is output when an
input is selected.
• The video connections are incorrect. • Make sure the video component is connected correctly
(see page 12).
• The input source is not properly selected. • Make sure the proper component is selected by
pressing the correct function button (see page 22).
• The DVD/video player settings are incorrect. • Set correctly. Refer to the instruction manual supplied
with the DVD/video player.
The settings have all been
cleared.
• The receiver has been unplugged or the
main power turned off for more than a month.
• Set the receiver again (see page 31).
OVERLOAD
blinks in the display
and the power turns off
automatically.
• The speaker cable is shorting out the unit. • Make sure there are no loose strands of speaker wire
touching the metal casing of the receiver.
• The output is too high. • Turn the volume down.
You can't set the subwoofer
frequency crossover.
• All the speakers are set to either large (
L
) or
––
(i.e. no speakers are set to small).
• Change the speaker settings (see page 31).
The display is dark or off. The display is set to dark or off. • Press
DIMMER
on the remote control repeatedly to
select a different brightness.
After making an adjustment the
display goes off.
• The display is set to off. • Press
DIMMER
on the remote control repeatedly to
select a different brightness.
Symptom
Cause Remedy
vsx-c301.book 40 ページ 2003年2月6日 木曜日 午後5時4分
40

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Pioneer-VSX-C301

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pioneer VSX-C301 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pioneer VSX-C301 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Pioneer VSX-C301

Pioneer VSX-C301 Gebruiksaanwijzing - Nederlands - 88 pagina's

Pioneer VSX-C301 Gebruiksaanwijzing - Deutsch - 44 pagina's

Pioneer VSX-C301 Gebruiksaanwijzing - Français, Italiano - 88 pagina's

Pioneer VSX-C301 Gebruiksaanwijzing - Espanôl - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info