737034
1
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
Ph Sf Cpny r eac n s gurte
FIRST OPENING ON FACTORY DEFAULT CODE
Factory code is 1 2 3 4 5 6
1. Touch the screen, to activate (1 bleep and screen illuminates).
2. Enter the user code (1st time usage 123456).
3. Touch OPEN, a melodic tone will sound and the display will
show OPEnd.
4. Turn handle counter clockwise and open the door while the
tone is sounding.
CAUTION
I. If an incorrect code is entered, Error will appear in the display
panel and a short warning tone will sound.
II. If a wrong code is entered 5 times the lock will cease to oper-
ate for 5 minutes. During which a warning tone will sound and
the display will indicate deLAY.
SETTING A NEW USER CODE
Set a new code with the door open and test the new code before
closing the door.
1. Touch the screen to activate
2. Touch ENTER
3. Type in the present code
4. Touch ENTER
5. Type in the new 4 – 16 digit code
6. Touch ENTER, a melodic tone will sound and the display will
show EntErd
For example:
If the present code is 1 2 3 4 5 6 and a new four digit code is
decided as 4 2 4 2 enter the following –
ENTER > 1 2 3 4 5 6 > ENTER > 4 2 4 2 > ENTER
EntErd will show in the display and a short tone will sound to
conrm the change to 4 2 4 2
INTRODUCING A FINGERPRINT
Open the door using the user code. Keep the door open while
carrying out this process.
1. Press the M button on the back of door, the screen will be
activated
2. Press 3 on the screen
3. Press ENTER
4. Enter the user code and press ENTER
5. Scan in the ngerprint twice
consecutively, by placing the
nger on the sensor. The screen
will show EntErd a melody will
sound.
NOTE: Check the nger print had
been set correctly following -
How to open with a ngerprint.
A total of 128 nger prints can be
introduced into the lock.
HOW TO OPEN WITH A FINGERPRINT
1. Touch the screen to activate
2. Scan the ngerprint on the sensor, the screen will show
OPEnd and a melody will sound.
3. Turn the handle counter clockwise and open the door while the
tone is sounding.
CAUTION
I. If an incorrect ngerprint is scanned, ErrOr will appear in the
display and a short warning tone will sound.
II. If a wrong ngerprint is scanned 5 times the lock will cease to
operate for 5 minutes. During which a warning tone will sound
and the display will indicate deLAY.
V1 JUL 2018
Battery Case
Hold the upper part and turn it counter-clockwise to
disassemble (1,5V AA Alkaline 4 pcs)
Upper part Lower part
Reset Button
Upper
part
Lower
part
Securing
Hole
Memory Button
Door back or Top drawer back
Put Finger-print twice
While red lamp flickering,
put user’s finger on sensor.
1
2
After Bi- sound,
repeat the above
1
SS1160F OPERATING INSTRUCTIONS
& GUARANTEE REGISTRATION
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Phoenix SS1162 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Phoenix SS1162 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info