736947
1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
Ph Sf Cpny Wr eac  n s gurte
OPENING YOUR SAFE FOR THE FIRST TIME
Upon rst opening, users should open the safe with the emergency key.
Insert the emergency key and turn it clockwise.
While holding the key to the right push handle downward to open.
Insert batteries and set user codes.
IMPORTANT: Keep the emergency key in a safe place BUT NOT IN
THE SAFE ITSELF.
INSERTING BATTERIES
Remove the battery cover on the back of the door (see diagram).
Insert 4 AA Alkaline batteries (not supplied) by lining them up in a
manner as indicated by the • + • and • - • signs.
Replace the battery cover door.
SETTING THE USER CODE
With the door open, press the reset button (located on the back of
door, see diagram),you will hear a beep the yellow light will come
on.
Input new code (3-8 digits), and press the “*”. The yellow light will
go out. Before closing the safe door enter the new user code and
press the “#”. Green light will come on indicating the code was
accepted.
ALARM SYSTEM
Press “*00” to activate the Alarm-U system.
If the safe is tampered with, the alarm will sound for 20 seconds.
To stop the alarm from sounding, enter the correct preset code or
use the override key to open the safe and remove the batteries.
TURNING THE KEYPAD SOUND OFF/ON
You can mute the keypad by entering the code *633. To turn it back on,
enter code *66.
OPENING THE SAFE WITH USER CODE
Input your user code followed by “#”.
The green light will come on.
Push handle in the downward position
OPENING THE SAFE WITH THE EMERGENCY KEY
NOTE: DO NOT STORE THE KEYS INSIDE THE SAFE.
Remove the cover of the emergency lock (see diagram).
Insert the emergency key, turn it clockwise.
While holding key to the right push handle down to open.
AUTOMATIC LOCK
3 continuously wrong entries will activate lockout mode for
20 seconds.
If a 6th wrong entry is made, lockout mode is 5 minutes.
Beeping and yellow light will ash for this entire lockout period.
CAUTION: The key pad will be disabled during lockout.
BATTERY REPLACEMENT
When batteries are removed the user codes will be deleted (see
below caution).
V1 OCT 2017
rese t
Handle
Poignée
Griff
Palanca
Reset Button
Bouton reset
Reset Knopf
Botón de reinicio
Key Pad
Clavier
Tastatur
Teclado
Emergency Key Lock Cover
Couvercle de la serrure
à clef de secours
Abdeckung Notöffnungsschloss
Tapa Protectora de la
Llave de Emergencia
Battery Door Cover
Couvercle du
compartiment
des piles
Abdeckung Batteriefach
Tapa del Compartimento
para Pilas
GUARANTEE REGISTRATION
Please submit your guarantee registration by
visiting our website www.phoenixsafe.com and clicking on
guarantee registration.
For further assistance or information please
contact us on 0151 944 6444.
APEX HOUSE, 1 ORRELL MOUNT, LIVERPOOL, L20 6NS,
UNITED KINGDOM | +44 (0)151 944 6444
FRENCH
OUVRIR VOTRE COFFRE POUR LA PREMIERE FOIS
Pour la première ouverture , l’utilisateur doit ouvrir le core avec la clef
d’urgence.
Pour la première ouverture , l’utilisateur doit ouvrir le core avec la
clef d’urgence.
Tout en tenant la clef vers la droite , poussez la poignée vers le
bas pour ouvrir.
Insérez des piles et installez le code personnel.
IMPORTANT: Mettez la clef dans un endroit sécurisé MAIS PAS
DANS LE COFFRE.
INSERER LES PILES
Enlevez le couvercle du compartiment à piles à l’arrière de la porte
( voir schéma).
Insérez 4 piles AA en les alignant comme indiqué par les signes .
+ . et . - .
Remettez le couvercle du compatiment à piles.
PROGRAMMER LE PREMIER CODE UTILISATEUR
La porte ouverte , appuyez sur le bouton reset ( situé à l’arrière de
la porte, voir schéma) , le voyant jaune s’allumera.
Entrez un nouveau code ( de 3-8 chires) , et appuyez sur “A” ou
“B”. Le voyant jaune s’éteindra. Avant de fermer la porte du core
entrez le nouveau code utilisateur et appuyez sur “A ou “B” ( le
code déverrouillera le core soit avec A soit B) . Le voyant vert
s’allumera indiquant que le code a été accepté.
Si le voyant jaune clignote avec 5 bips , le code utilisateur ,’a pas été
accepté.
PROGRAMMATION D’UN SECOND CODE UTILISATEUR
Avec la porte ouverte, appuyez 00 puis appuyez sur le bouton
reset ( situé à l’arrière de la porte , voir schéma) , le voyant jaune
s’allumera.
Entrez un nouveau code ( 3-8 chires) puis appuyez sur “A” ou
“B” . Le voyant jaune s’éteindra. Avant de fermer la porte du cof-
fre , entrez le nouveau code utilisateur et appuyez sur “A” ou “B”
( le code déverrouillera soit avec A soit avec B). Le voyant vert
s’allumera indiquant que le code a été accepté.
Une fois que tous les codes utilisateurs sont programmés , en-
levez la clef d’urgence, et placez la pastille noire sur le trou ( voir
schéma). Gardez la clef d’urgence dans un endroit secret MAIS
PAS DANS LE COFFRE LUI MEME.
Si le voyant jaune clignote avec 5 bips, le code utilisateur n’a pas été
accepté.
OUVRIR LE COFFRE AVEC LE CODE UTILISATEUR
Entrez votre code suivi de “A” ou “B”.
Le voyant vert s’allumera.
Poussez la poignée vers le bas.
OUVRIR LE COFFRE AVEC LA CLEF D’URGENCE
ATENTION: Gardez la clef d’urgence dans un endroit secret MAIS
JAMAIS DANS LE COFFRE LUI MEME.
Enlevez la pastille de la serrure à clef( voir schéma).
Insérez la clef d’urgence, tournez la dans le sens d’une aiguille
d’une montre.
To replace the batteries, open the battery compartment on the back of
the door by pushing the tab in the direction of the arrow and install all
new batteries.
NOTE: Do not mix old and new batteries. Do not mix alkaline, standard
or rechargeable batteries.
CAUTION! When batteries are removed, the user codes will be
deleted. You will need to reset user codes by following the
SETTING THE USER CODE instructions. If batteries are depleted
you will need to use the Emergency Key to gain access to replace
batteries. Then follow the SETTING THE USER CODE instructions.
Keep the emergency key in a safe place BUT NOT IN THE
SAFE ITSELF
FS1290 SERIES
ELECTRONIC LOCK INSTRUCTIONS
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Phoenix FS1291 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Phoenix FS1291 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info