737003
1
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Ph Sf Cpny r eac n s gurte
BATTERY INSTALLATION 4 X LR03 AAA ALKALINE
(SUPPLIED)
1. FIRST OPENING ON FACTORY DEFAULT CODE
Step 1 Press ‘C’ button
Step 2 Press factory code ‘ 1 2 3 4 5 6’
Step 3 Press ‘#’ button, a melodic tone will sound and the display
conrmsOPEnd
Step 4 Turn Knob or Handle clockwise and open the door while the
tone is sounding
Caution
Ifanincorrectcodeisentered,Errorwillappearinthedisplaypanelanda
shortwarningtonewillsound.Ifanincorrectcodeisenteredvetimesthe
lockwillceasetooperateforveminutes,awarningtonewillsoundand
thedisplaywillindicatedELAY.
C > 1 > 2 > 3 > 4 > 5 > 6 > #
2. SETTING A NEW PERSONAL CODE.
Itisadvisabletosetanewcodewiththedooropenandtestthenewcode
before closing the door.
Step 1 Press ‘#’ button
Step2 EnterthePresentCode.
Step 3 Press ‘#’ button.
Step4 EnterNew4~16digitCode.
Step 5 Press ‘# button.
For Example:
If the present code is 1 2 3 4 5 6 and a new four digit code is decided as 4
2 4 2 press buttons as below.
# 1 2 3 4 5 6 # 4 2 4 2 #
EnTErdwillbeindicatedinthedisplayandashort3secondtonewill
soundtoconrmthechangeto4242
# > 1 2 3 4 5 6 > # > 4 2 4 2 > #
3. SETTING THE DUAL CONTROL FUNCTION WHERE
TWO OPERATORS WITH INDIVIDUAL PERSONAL CODES
ARE REQUIRED TO OPEN THE LOCK.
With the door in the open position set the second code.
Step 1 Press the “M” memory button recessed into the back
of the door.
Step 2 Press ‘2’ button
Step 3 Press ‘#’ button
Step4 Enter2ndPersonalcode
Step 5 Press ‘#’ button
EnTErdwillbeindicatedinthedisplayandashort3secondtonewill
sound,toconrmthe2ndcodeentry.
For Example:
If the present code is 4 2 4 2 and a second new four digit code is decided
as6789pressbuttonsasbelow.EnTErdwillappearinthedisplay
accompaniedbyashorttonetoconrmM2#6789#
M > 2 > # > 6 7 8 9 > #
4. TO ACTIVATE DUAL CONTROL
Step 1 Press the “M” memory button recessed into the back of the
door.
Step 2 Press ‘9’ button
Step 3 Press ‘#’ button
M > 9 > #
5. TO OPERATE WITH THE DUAL CONTROL FUNCTION
Step 1 Press C button dual will appear in the display.
Step2 Entertherstcode4242
Step3 Press‘#’button.ashort3secondtonewillsoundtoconrm
correct code
Step 4 Within 5 minutes enter the second code 6 7 8 9
Step5 Press‘#button.ashort3secondtonewillsoundtoconrm
correctcodeandOPEndwillappearinthedisplayandthelock
willbeopen.Eithercodecanbeenteredrstorsecond.
C > 4 2 4 2 > # > 6 7 8 9 > #
6. TO DEACTIVATE DUAL CONTROL
Step 1 Press the “M” memory button recessed into the back of the
door.
Step 2 Press ‘9’ button
Step3 Press‘#’buttonashort3secondtonewillsoundtoconrm
deactivationandSinGLEwillappearinthedisplay.Thesecond
code will be automatically erased.
M > 9 > #
7. TO HIDE CODE IN THE DISPLAY AND TURNOFF
KEYPAD SOUND.
Activate Pressthe“M”memorybuttonrecessedintothebackofthe
door,press7then#(HIdEappearsinthedisplay)
DeactivatePressthe“M”memorybuttonrecessedintothebackofthe
door, press 7 then #
M > 7 > #
8. TO HIDE CODE ENTRY IN A NUMBER SEQUENCE.
The code can be disguised by inserting random numbers either before,
after or both before and after, the personal code. This procedure is
designedtoincreasesecurityandtoconfuseapotentialobserver
attempting to memorise the code. This feature can be also be used
withhiddencodedisplayandsilentkeypadasat7above.
For Example
Personalcodeissetas4242Randomprexnumbers61Randomsux
numbers 91507
Step 1 Press C button
Step2 EnterCodeas61424291507
Step 3 Press ‘#’ button
ThedisplaywillconrmOPEnd
C > 61 4 2 4 2 91507 > #
9. ALARM SETTING
Activate Pressthe“M”memorybuttonrecessedintothebackofthe
door,press8then#(ALErTappearsinthedisplay)M > 8 > #
Deactivate
Step 1 Press ‘C button
Step2 EnterPersonalCode
Step3 Press‘#’buttonashort3secondtonewillsoundtoconrm
deactivationandOPEndwillappearinthedisplay.
C > Personal Code > #
10. BATTERY LIFE: 1 YEAR 3 TIMES A DAY.
BATTERY REPLACEMENT IS REQUIRED WHEN:
1. LObAttappearsindisplayaccompaniedbyashortonesecondwarn-
ing tone.
2. Correct code is entered but lock will not open.
3. Evenifbatteriesarecompletelyexhausted,thecodesarenotlost.
11. BATTERIES
4x1.5VAAAAlkalineBatteriesarerequiredtoactivatethelock.Used
batteries should not be disposed of with normal domestic waste. These
shouldbedisposedofatapprovedcollectionpoints.Youmay
alsoreturnusedbatteriestoyourRetailerattheirexpense
(whereapplicable).
V1/PBMAY2018
KeypadandLCDdisplaywindow
CButton
start button
#Button
Batteryposition
under keypad
2. Press the keypad opening mark, to
release the retaining arm and swing the
keypad up and left, to open.
1.Removekeypad
retaining screw
Upper
part
Lower
part
OpeningBatteryCompartment
OPERATING INSTRUCTIONS FOR DS2500E
& GUARANTEE REGISTRATION
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Phoenix DS2501 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Phoenix DS2501 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info